Super Bright LED Side Light for R1200GS & Adv + F800GS

MotorbikeAdventures

Registered user
Joined
Jun 19, 2010
Messages
831
Reaction score
0
Location
Bedfordshire
LED CANBUS SIDE LIGHTS FITS HUNDREDS OF BIKES, LOOKS FANTASTIC, LOOKS GREAT WITH HID LIGHTS.
Please be aware the bulbs will only work one way round in the socket, if they do not light turn them around by 180 degrees.
Features a brand newSuper Bright 360-degree shine SMD (SMT) T10 wedge LED bulbs with built-in load resistors, specially designed for vehicles such as Mercedes, Audi, Volkswagen, Porsche or BMW motorbikes, etc.
These OBC Error Free T10 Wedge LED bulbs will replace the stock 168, 194, 2825, 2821 or W5W bulbs.
The length of this T10 LED bulb is approx 1.15 inches. Since this T10 LED bulb is slightly longer than the stock wedge tungsten bulb, so buyers must make sure the this T10 SMD LED bulb can fit into the housing before buying.
Each LED bulb is equiped with 8 pieces High Power 1210 SMD CREE LED Chips, with built-in Load resistors, so they will work properly for vehicle's parking city lights (position lights), sidemarker lights such as Mercedes, BMW, Audi, etc.
www.motorbikeadventures.co.uk or call 01234 397636
LED%20group%20large.jpg

LED%20group.jpg


PA120002.JPG



PA110010.JPG


PA110014.JPG

PA110008.JPG

A direct replacement for any 501, W5W,168,194,2825,2821 bulb or T10 capless bulbs. Please check your light fitting or examine existing bulb for compatibility. These bulbs are commonly used around most cars and bikes, Lots of models use T10 for the interior light / number plate lights and many more
 
£8.99 Plus £2.99 P&P You can send me money via PayPal email:- [email protected] or order direct from our website :- http://www.motorbikeadventures.co.uk/category.php?id_category=29




LED CANBUS SIDE LIGHTS FITS HUNDREDS OF BIKES, LOOKS FANTASTIC, LOOKS GREAT WITH HID LIGHTS.

Please be aware the bulbs will only work one way round in the socket, if they do not light turn them around by 180 degrees.
Features a brand newSuper Bright 360-degree shine SMD (SMT) T10 wedge LED bulbs with built-in load resistors, specially designed for vehicles such as Mercedes, Audi, Volkswagen, Porsche or BMW motorbikes, etc.
These OBC Error Free T10 Wedge LED bulbs will replace the stock 168, 194, 2825, 2821 or W5W bulbs.
The length of this T10 LED bulb is approx 1.15 inches. Since this T10 LED bulb is slightly longer than the stock wedge tungsten bulb, so buyers must make sure the this T10 SMD LED bulb can fit into the housing before buying.
Each LED bulb is equiped with 8 pieces High Power 1210 SMD CREE LED Chips, with built-in Load resistors, so they will work properly for vehicle's parking city lights (position lights), sidemarker lights such as Mercedes, BMW, Audi, etc.
www.motorbikeadventures.co.uk or call 01234 397636

LED%20group%20large.jpg

LED%20group.jpg


PA120002.JPG







PA110010.JPG


PA110014.JPG

PA110008.JPG


A direct replacement for any 501, W5W,168,194,2825,2821 bulb or T10 capless bulbs. Please check your light fitting or examine existing bulb for compatibility. These bulbs are commonly used around most cars and bikes, Lots of models use T10 for the interior light / number plate lights and many more
[/quote]
 
My order is with you Mick. Looking forward to seeing the LED in action.
Good to chat with you today.
Best wishes. Kev
 
O.K . its got me confused !!!:comfort. Is the 1200GS already fitted with LED bulbs, other than the headlights.
 
O.K . its got me confused !!!:comfort. Is the 1200GS already fitted with LED bulbs, other than the headlights.

The 1200GS an ave both dip and main upgraded to HID with our conversion kits and it can have an LED fitted to the side light.... The GSA can also have its fogs upgraded to HID fogs! Have a look a out website under HID Lights for more info or gve us a call.

:thumb www.motorbikeadventures.co.uk :eek:

Regards

Mick
 
Hi Dan,

Many thanks for your order both LED's and 4 HIDs they have been posted today Special delivery be with you before 1200 tomorrow! 12 months Guarantee on the HIDs.

Best Regards

Mick
 
Is anyone using one of these on there F800GS? Any issues at all? Look good but read somewhere they could be an issue:confused:
Cheers
Matt
 
Is anyone using one of these on there F800GS? Any issues at all? Look good but read somewhere they could be an issue:confused:
Cheers
Matt

Hi Matt, just to let you know i fitted one just before Christmas to a new F800GS the guys a Police Officer along with a set of nice HID lights, geat fitting no problems heard from him last week and no problems reported.

The LED's we supply are not the plastic ones you can get and i belive there was an issue with melting of the holder but we havent has any issues with this type of LED plus ours work with Can Bus as they are fitted with resistors!

http://www.motorbikeadventures.co.uk/product.php?id_product=126 :thumb2


Regards

Mick
 


Back
Top Bottom