Super Pro AVI/2610 Help

[Berin]

Hi All. I've got a Super Pro AVI and 2610, fitted at the dealer. They fitted it in the tool box, though so I've moved it up to where the manual goes. In re-routing, I disconnected the red mixer/isolator, and now I've no idea whether it's a part 1281, 1282, 1285 or 1286, which all seem to look exactly the same. There don't seem to be any identifying marks on it anywhere. Any idea how I could figure it out and therefore figure out whixh aux socket it goes back into.

yes, I know I should have checked before disconnecting

 

[Chuck]

Think I have the same set up.

The red mixer is a 1285 and the lead goes to Aux4

Goodluck

Hi All. I've got a Super Pro AVI and 2610, fitted at the dealer. They fitted it in the tool box, though so I've moved it up to where the manual goes. In re-routing, I disconnected the red mixer/isolator, and now I've no idea whether it's a part 1281, 1282, 1285 or 1286, which all seem to look exactly the same. There don't seem to be any identifying marks on it anywhere. Any idea how I could figure it out and therefore figure out whixh aux socket it goes back into.

yes, I know I should have checked before disconnecting

 

[Berin]

 

[rubberscrubber]

Think I have the same set up.

The red mixer is a 1285 and the lead goes to Aux4

Goodluck

same here although Im running a lowly rated but cute Quest

 

[GSrich]

The 1285 is solid red with a 4 pole connection (three rings around the tip of the jack plug)

The Part 1282 is red/black with either 3 or 4 pole connection all depending on how old the part is.

The part 1281 is part we rarely sell and is solid black.

HTH

Rich