SWITCHED LIVE GSA 1200 2017

[Gordyman]

I am fitting a few things to my bike one of which is a pair of front and rear cameras (Innovv K2).

I need to tap into a switched live. I have located the fuse thingy by the base of the fuel tank under the rider's seat but my problem is that searching through the various threads I can only find reference to the brown and red cable as being the one to tap into within this group of cables; however as you can see from the picture below none of the cables in this area on my bike are colour coded red and brown.

Anyone out there know which one of these would be the most suitable for me to tap into please?
Thanks for your help.

 

[Deleted account 191119001]

I am fitting a few things to my bike one of which is a pair of front and rear cameras (Innovv K2).

I need to tap into a switched live. I have located the fuse thingy by the base of the fuel tank under the rider's seat but my problem is that searching through the various threads I can only find reference to the brown and red cable as being the one to tap into within this group of cables; however as you can see from the picture below none of the cables in this area on my bike are colour coded red and brown.

Anyone out there know which one of these would be the most suitable for me to tap into please?
Thanks for your help.

Check video 5 mins in and it will show you, it is about heated seat, but shows you the wire to splice.

 

[Roadrash Rider]

the red wire with Blue stripe is a switched live, so goes off with ignition

 

[Deleted account 191119001]

the red wire with Blue stripe is a switched live, so goes off with ignition

Bad man, I was hoping he had to watch the video............

 

[Gordyman]

the red wire with Blue stripe is a switched live, so goes off with ignition

Bad man, I was hoping he had to watch the video............

Hi Smogbob and Roadrash Rider
Thanks for your replies and help. As always Ukgser delivers
Smogbob I did watch the video that you kindly attached too. The magic information is at 6.02

 

[Deleted account 191119001]

the red wire with Blue stripe is a switched live, so goes off with ignition

Hi Smogbob and Roadrash Rider
Thanks for your replies and help. As always Ukgser delivers
Smogbob I did watch the video that you kindly attached too. The magic information is at 6.02

Sorry to make you suffer, but credit to MF he is funny.........

 

[Bob Jeffries]

Smogbob, if you haven't yet bought the Innovv try taking a look at the V-Sys P6FL.

I have one and am very pleased with it and it's less than half the price of the Innovv.

They also do one with a Bluetooth link for your intercom so you can "blog as you ride"

 

[Deleted account 191119001]

Smogbob, if you haven't yet bought the Innovv try taking a look at the V-Sys P6FL.

I have one and am very pleased with it and it's less than half the price of the Innovv.

They also do one with a Bluetooth link for your intercom so you can "blog as you ride" ��

Bob I have already bought the V-Sys P6FL and installed it, do catch up..............

https://www.ukgser.com/forums/showt...rd-wired-too-much-to-ask/page3?highlight=vsys

 

[tripleblack]

i have the same camera i put the power cable into the fuse for the running lights so no cutting or splicing cables works fine

 

[Deleted account 191119001]

i have the same camera i put the power cable into the fuse for the running lights so no cutting or splicing cables works fine

Nice one, any chance of a picture of what you done, seems a better idea.....

 

[Fullchat]

I taped into red and green for Autocom on my 17 GSA as I identified it also switched off as the canbus shut down.
I did note however that on my 15 bike red and blue was the wire of choice.