System 6 With Autocom

[zoltan]

According to my dealer is not possible to fit the Autocom to the helmet because there is no room for the wiring and speaker( designed to take only BT) . Has any one tried?

 

[GSrich]

So not true, they are a very comms friendly helmet and we even fitted on here this morning so this prove your dealer wrong. they in principle the same as the Schuberth C3's which we have fitted a lot of them so far

Rich

 

[Deleted Member I]

That's good to know .. I am thinking of getting one.

 

[ianm00]

When I looked at the helmet its easy to pull the lining back and you can see the cutouts in the foam for speakers.

GSRICH I assumme the autocom speakers fit into the recesses ok?

Im thinking of getting a system 6 and will also want to fit my autocom speakers into it.

Ian

 

[zoltan]

So not true, they are a very comms friendly helmet and we even fitted on here this morning so this prove your dealer wrong. they in principle the same as the Schuberth C3's which we have fitted a lot of them so far

Rich

Interesting , they had a System 6 with all the lining apart , in clear attempt to fit the speakers. Dealer was telling me that the speakers are to large for the cutouts and that the lead that exists the helmet is to thick ,hence the lining does not fit/click back properly...
Maybe I could come and see you , for a fitting?

 

[PJ1200]

Interesting , they had a System 6 with all the lining apart , in clear attempt to fit the speakers. Dealer was telling me that the speakers are to large for the cutouts and that the lead that exists the helmet is to thick ,hence the lining does not fit/click back properly...
Maybe I could come and see you , for a fitting?

Sounds like your dealer wants you to buy their bluetooth headset when it comes out . I've just fitted my system 6 with the autocom headset and it fits perfectly. cutouts are just the right size for speakers .

 

[autogs]

Sounds like your dealer wants you to buy their bluetooth headset when it comes out . I've just fitted my system 6 with the autocom headset and it fits perfectly. cutouts are just the right size for speakers .

oi get back to your printing press

 

[autogs]

That's good to know .. I am thinking of getting one.

yea course you are

 

[PJ1200]

oi get back to your printing press

finished that M.o.T. yet

 

[autogs]

no,i kept getting interrupted

 

[gsman1]

System 6 autocom

Got system 6 with autocom fitted no problem dealer telling you a load of B......ocks!!!!!

 

[mvrandery]

I'm going to try and install the autocom headset in my System 6.

Can someone who's done it (or knows something about it) post any tips they have?

I guess it's different from fitting it to a system 5 as the chinguard on the 6 does not seem to come off.

I didn't see any instructions for fitting into a C3 or a system 6 on the autocom website.

Thanks

 

[wacits]

System 6 and autocom

Try this link

http://www.ukgser.com/forums/showthread.php?t=164610&page=2


Wife's helmet arrived awaiting for mine to arrive before i tackle both helmets.

 

[mvrandery]

Try this link

http://www.ukgser.com/forums/showthread.php?t=164610&page=2

Just what I needed

Thanks a lot wacits