raggyman55
Guest
Does anybody have instructions for fitting a Sysytem 6 comms' kit. Any shared knowledge may help. Do the battery and circiut board install behind the polystylene cheek pads?
SilverFish
Registered user
I've never seen any instructions available, and I've only ever heard of them being fitted by dealers.
Sorry
Mike
Sorry
Mike
raggyman55
Guest
Thanks for the reply Mike. Seems they have only issued fitting instructions to dealers. Bit underhand considering you can by the unit for retro-fitting.
divelandy
Registered user
Are they that different to a Schuberth C3?
- take a look at C3 fitting thread with my ugly mug and see if that's any good.
- take a look at C3 fitting thread with my ugly mug and see if that's any good.
Bluetooth
yeah most dealers would probably fit it FOC, if you bought it from them.
Mine cost me a few beers.
Good bit of kit bty lfe 10-12 hrs on sat nav.
yeah most dealers would probably fit it FOC, if you bought it from them.
Mine cost me a few beers.
Good bit of kit bty lfe 10-12 hrs on sat nav.
The polystyrene liner is in three parts in the system 6.
Once you have removed the padding and a few screws the two sides of the polystyrene liner can be removed and there are two cutouts between polytstyrene and outer shell that the battery pack, on one side, and curcuit board on the other.
Also two of the red stud popper fittings is removed and a new ones fitted with the mic mounting in between them.
Once you have removed the padding and a few screws the two sides of the polystyrene liner can be removed and there are two cutouts between polytstyrene and outer shell that the battery pack, on one side, and curcuit board on the other.
Also two of the red stud popper fittings is removed and a new ones fitted with the mic mounting in between them.
Similar threads
