Paypal in but unfortunately not as a gift...........
Tool Tubes 09
- Thread starter Bem
- Start date
Paypal in but unfortunately not as a gift...........
OK Tossers, general update.
Tubes ordered at the begining of the month still not arrived (last years delivery time was between 8 days and 7 weeks!) - am chasing.
And for SwissRob, I resorted to hanging it on the bottom of the RH vario. Most other places seemed to be be just a little bit too tight.
Tubes ordered at the begining of the month still not arrived (last years delivery time was between 8 days and 7 weeks!) - am chasing.
And for SwissRob, I resorted to hanging it on the bottom of the RH vario. Most other places seemed to be be just a little bit too tight.
DaveyP
Registered user
PM sent re order
Hi Bem have sent Payment as directed
Cheers DaveyP
Hi Bem have sent Payment as directed
Cheers DaveyP
Latest news from supplier
Tool Tubes arrived UK on 17 March according to US Postal.
So where are they??
Now lets think about this, if it takes 7 days to travel 3500 miles, why does it take more than 14 days to NOT travel 350 miles??
Any sensible answers on here please.
badgerrrrrr
Registered user
Latest news from supplier
Tool Tubes arrived UK on 17 March according to US Postal.
So where are they??
Now lets think about this, if it takes 7 days to travel 3500 miles, why does it take more than 14 days to NOT travel 350 miles??
Any sensible answers on here please.
Have the latest batch arrived yet....... interested if they have
Arriva Viva!!
Bagged and despatched to
6821snape
mIrboo72
Moley x 2
DaveyP
(But still no reasonable answers on the delay - any Parcel Force employees willing to comment??)
And for those still wanting, send me your money please.
Bagged and despatched to
6821snape
mIrboo72
Moley x 2
DaveyP
(But still no reasonable answers on the delay - any Parcel Force employees willing to comment??)
And for those still wanting, send me your money please.
jasext
Registered user
Just sent payment for one tube 
jasext
Registered user
Any news on when they are being sent out,still not got mine
jasext
Registered user
Anyone heard from Bem ,it's been over a week since i sent payment for the tool tube but havent heard anything back ,sent a couple of emails also ?
eggsy
Registered user
Knackered Tool Tube PLEASE READ
Bought two Tool Tubes from Bem and they were excellent, however i need to warn others how not to fit them.
I fitted mine at the back basically across and underneath the top box by two small metal u-clips i had made. (Ive got an 09 GSA).
After packing them with the BMW tool set and other bits i travelled to Crete and found that the tyre had smashed the Tube off with all the tools when the suspension lifted the back wheel going over a bump.
My fault i thought so bought another one from Bem. The sodding thing happened again.
So be warned.
No criticism of Bem as the Tool Tubes were good quality, it was down to me not fitting them properly.
Good luck.
Eggsy
Bought two Tool Tubes from Bem and they were excellent, however i need to warn others how not to fit them.
I fitted mine at the back basically across and underneath the top box by two small metal u-clips i had made. (Ive got an 09 GSA).
After packing them with the BMW tool set and other bits i travelled to Crete and found that the tyre had smashed the Tube off with all the tools when the suspension lifted the back wheel going over a bump.
My fault i thought so bought another one from Bem. The sodding thing happened again.
So be warned.
No criticism of Bem as the Tool Tubes were good quality, it was down to me not fitting them properly.
Good luck.
Eggsy
jasext
Registered user
All sorted arrived today
TFT.
The only place to fit on a GSA is inside the right pannier frame, as the rear wheel travel will eventually reach up to any "across the frame" position.
ricdunn
Registered user
PM sent, 2 please, paypal gift on the way. Cheers! 
Goose
Registered user
TFT.
The only place to fit on a GSA is inside the right pannier frame, as the rear wheel travel will eventually reach up to any "across the frame" position.
Just so you know... I'm a reseller of the same described tubes here in South Africa... and they have been nicknamed the "GooseToobs"!
I am custom designing brackets for the GSA's to allow 2 tubes to be fitted in a very obvious place at the back of the bike - using one as a tooltube and the 2nd one as a Medical Kit. In fact - we've managed to get a few novel ways and brackets to mount to various bikes.
As I'm certain there are a lot of GSA'ers on the thread... I'll post some piccies as soon as they are done.
mikestatt
Registered user
I'd like one if still available please.
(RIP) Ewan
Registered user
Tool Tubes
Hi Bem,
How much inc postage for four, if still available?
Thanks!
Hi Bem,
How much inc postage for four, if still available?
Thanks!
gnikwp
Guest
Bem,
If you have any tubes left, could you please let me know the cost of 1 tube +P&P to Norfolk.
Cheers,
gnikwp
If you have any tubes left, could you please let me know the cost of 1 tube +P&P to Norfolk.
Cheers,
gnikwp
Just expecting to see confirmation of arrival of tool tubes by the following
Tangiblesolid
Ricdunn
gr8roberto
Ewan
gnikwp, see previous page for details, but as always being a Subscribed Tosser makes communication a little easier
Tangiblesolid
Ricdunn
gr8roberto
Ewan
gnikwp, see previous page for details, but as always being a Subscribed Tosser makes communication a little easier
ricdunn
Registered user
Received yesterday, cheers Bem... now to figure out some clever fastenings
Tube arrived today.
Well pleased, Many thanks
Well pleased, Many thanks
