TPS values with 911

Kenny Rodkiss

Well-known member
UKGSer Subscriber
Joined
Jan 6, 2002
Messages
1,154
Reaction score
22
Location
Scottish borders
After resetting my service reminders I was having a look at real time values and noticed that the reading for TPS was only getting up to nearly 50% then counting back down with a negative value back to zero when on full throttle?
bike runs fine?
Tried a reset which made no difference.
Not tried resetting the adaption values yet cos the thunder and lightning and pishing doon.
 
The TPS reading should go from 0 to 100 % when checked with a GS911.
I would reset adaptations and then run the TPS from 0 to 100% a couple of times.
 
Strangely it shows going from zero to 100% on the mobile app as expected.
Only when using the laptop with the full Monty software does it show the anomaly.
Don't know why it would also show a negative number?
ie on the way up numbers read as normal but after half throttle the numbers count down with a, bracket, minus, bracket, (-)
 
Can't, it's like a wet paint sign plus I spend ages getting the car radio volume to be on an even number........Volume 27.......noooooooooooo!!!!!!!
 
Just tried the mobile via Bluetooth 0 to 100% and the laptop via USB cable 0 to 100%. ( actually they all reed 0 to 100.01% for some reason? )
I think If I were you I would first uninstall and reinstall the software in the laptop. if no success then post on the GS911 forum.
 
I am inclined to agree, took the bike for a thrashy test run, pulls like a train going up through the box on full throttle runs.
Run out of road very quickly.
It feels as smooth and torquey as it always has.
Think the laptop is giving me a bum steer.
 
Just checked my 2012 gsa with the 911 and my old netbook. Mine counts from 0 to 50, then - 50 to zero. Same as yours!
Bike runs fine.

Sent from my GT-I9505 using Tapatalk
 
Does the netbook run the mobile version of the software?
My laptop is an old dell running widows vista.
I have logged a question about it with hexcode and I have yet to send them an autoscan and tech details.
 
I think the mobile version is designed to run on android,but not sue about any other.
I have 2 notebooks one on windows 10 and the other old one on windows XP , both run the full PC software OK.
 
Feedback from hexcode,

Status: solved
Comment by: Francois
.---
| That is good to hear, thank you for the feedback. This was a bug that was fixed in the latest release version.

I have now updated software from v 1511 to v 1603 and TPS reads 0% to 100% as expected.
Sorted.
 


Back
Top Bottom