Tyre change and spline oiling
- Thread starter Winjar
- Start date
Dont really see what use it is on a GS,
the wheel is clear of the ground anyway, so using a lifter is pointless.
the wheel is clear of the ground anyway, so using a lifter is pointless.
digby
Registered user
Seems to be for weaklings who can’t lift a wheel or find a wooden block ��
I think it looks very neat. Just not for the single sided beemers.
The GS wheel has to locate onto the hub (has that been improved on the water cooled bikes? On the Hex head/ Twin cam there's barely enough to hang the wheel onto, another 7-10mm would have made a big difference!)
Sent from my SM-G975F using Tapatalk
The GS wheel has to locate onto the hub (has that been improved on the water cooled bikes? On the Hex head/ Twin cam there's barely enough to hang the wheel onto, another 7-10mm would have made a big difference!)
Sent from my SM-G975F using Tapatalk
It help a lot for final drive lube, and lifting wheel up slowly, and it help to remove wheel also as you can push a little to side.
How high will it lift the wheel? It's not clear in the video.
Sent from my SM-G975F using Tapatalk
IXXO WHEELS weighs 2.6 kilograms (5.73lbs). When folded, the overall height is 60 millimeters while it is 140 millimeters in the fully extended position. This results in a lifting height of eight centimeters, so 14cm from garage floor, machine is 6cms thick.
Same job 14.99, you see them in race paddocks. https://www.screwfix.com/p/winbag-i...WowXeuHiLYHChiaMN4BoClSkQAvD_BwE&gclsrc=aw.ds
Liddlyaldi sell a brace of them as and when.
Similar threads
