Tyre pressure sensors

[bitwobbly]

Ordered new sensors for my 2010 twincam.
Nippy Norman's sent these.
Now the issue is have is there is no valve stem so can't be fitted.
Where do I buy the valve stems?

Original sensor;

 

[Mr Bean]

Have you thought about digging out the battery and replacing it?

 

[bitwobbly]

I'd like to replace then really. 15 years old.
Sorry to say that Nippy Norman's have been less than helpful.

 

[Smiffypr]

Ordered new sensors for my 2010 twincam.
Nippy Norman's sent these.
Now the issue is have is there is no valve stem so can't be fitted.
Where do I buy the valve stems?View attachment 414804

Original sensor;View attachment 414805

No experience with these, just looking at the pictures, surely you unscrew the stem part from the old sensor using the hex provided, then re-use that with the new sensor.
That said, in the tiny picture of the new sensor, on the leaflet, it shows a stem that looks like if goes through the sensor to a "nut" on the other side. So I would be telling Nippy Norman to provide what is on the picture, including the stem.

 

[RadioFlyer]

Everything that you need to know is in this paper:

https://valleybmwriders.com/media/kunena/attachments/1063/SchraderReplacementSensorsV2.pdf

 

[MWH]

Click on link. I used these, Schraeder 5082m. They are black but you can get silver, can't recall their number off hand.

Page 4 of Radio Flyers link has them all.

Google Search