UKGSER discount at Signature Custom Designs

Nutty

Registered user
Joined
Aug 5, 2010
Messages
30,490
Reaction score
-61
Location
Here
I've been speaking with the MD over at www.signaturecd.com and they have agreed to give forum members 15% off.:thumb

Just enter UKGSER in the coupon box at checkout.

I've put this in the vendors section, but thought it worth mentioning here, as they do loads for the LC GS/ GSA.
 
Ordered a signature pack, Spike series Configurator €220 & delivery €10, with discount €197.00 & at PayPal exchange rate of approx 1.3 payment a few pennies under £150..

Been looking for a while, never ordered but with exchange being good & added bonus of a bit of discount took the bull by the horns..
Thanks for arranging discount..:beerjug:
 
Good customer service from Signature Designs. I ordered a set of the matt clear paint protectors for my GSA. The delivery time was a little longer than I expected but that wasn't really a big deal. When I received the stickers I noticed that the main tank sticker had a kink due to it getting caught in the packaging prior to shipping and because of that it didn't adhere properly to the tank even with a bit of heat applied. Contacted SD and a replacement was sent out straight away, no hassles. :beerjug:
 
davehartuk said:
Good customer service from Signature Designs. I ordered a set of the matt clear paint protectors for my GSA. The delivery time was a little longer than I expected but that wasn't really a big deal. When I received the stickers I noticed that the main tank sticker had a kink due to it getting caught in the packaging prior to shipping and because of that it didn't adhere properly to the tank even with a bit of heat applied. Contacted SD and a replacement was sent out straight away, no hassles. :beerjug:
Click to expand...

Their service is brilliant. One of my top box sheets had an imperfection, so they sent me another sheet. I asked for some spare, so I could do some other parts, and he included them at no charge.
 
Were they easy to apply, how do you line them up so they are symetrical both sides ?

I'd worry I'd get them on crooked
 
Vanguard said:
Were they easy to apply, how do you line them up so they are symetrical both sides ?

I'd worry I'd get them on crooked
Click to expand...

Soapy water on the part you want to stick the vinyl to, and soapy water on the sticky side of the vinyl. Move it around while its wet, then squeegee the water out (I used a credit card wrapped in a micro fibre cloth, as I'm tight and didn't want to buy a squeegee! :D) Then use a hairdryer to seal it. :thumb
 
I got these last year, easy to fit and go well with the faster Blue Bike :augie and after trouble with the Tesco bags discolouring I got the clear wrap for them and they work a treat :thumby:
 

Attachments

  • R1200GSA graphics.jpg
    R1200GSA graphics.jpg
    83.4 KB · Views: 283
The Nutty GSER said:
Soapy water on the part you want to stick the vinyl to, and soapy water on the sticky side of the vinyl. Move it around while its wet, then squeegee the water out (I used a credit card wrapped in a micro fibre cloth, as I'm tight and didn't want to buy a squeegee! :D) Then use a hairdryer to seal it. :thumb
Click to expand...

Thanks for the advice, when you say soap do you mean washing up liquid ?
 
Here's mine
35929083d287aecd5727dbd646c34817.jpg
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

Annette
Rugged Roads UKGSer Discount
Replies
12
Views
4,588
adventuredon
adventuredon
Annette
Rugged Roads UKGSer Discount
Replies
3
Views
3,410
Annette
Annette
UKGSER discount at Signature Custom Designs
2
Replies
34
Views
8,155
Marius in Africa
Marius in Africa


Back
Top Bottom