I had this problem on my first 1100 some years ago.
Have a look at the pump mounting plate. On mine, a small metal pipe, with a right-angled bend in it, has a breather pipe connected to it. The metal pipe had corroded internally and become blocked on the bend.
I tried clearing the blockage by inserting the frayed end of an old cable and twisting it, if this is your problem, you could try that. But be careful, I managed to break the pipe on the bend. Luckily the break was behind the blockage, and there was enough left sticking from the back plate for me to connect the rubber pipe to.
But get this sorted, I took my time over it, and only acted when it was too late, after the repeated sucking of a vaccuum in the tank put a deep crease in the left hand side.