Very sexy stainless lower engine cover

Not sure if this has been asked already, but any chance you could stick an A on the end for those of us with superior machinery Mark?
 
Light mounting brackets & Superior Machinery

To both most recent posts - geezers, no problems (well. there is actually, and it`s time):(

Send me images of the brackets you are talking about and I`ll take a look - if I think I can make it (don`t know if you know I have my own factory - www.cymarc.co.uk - and it drives my manager nutless :roll when I use 1/4 of a million pounds worth of industrial laser to make bike bits :))

But anyway, I am seriously looking at making a light bracket to fit under the beak of a R1200GS (I have one) in stainless, very high quality and so f*cking horny it even makes men wet :bounce1 If you keep an eye on the continual dribble I churn out hopefully you`ll see the final item and if you are interested then send me dosh. i would promise to get back in touch but a) I`ll loose your contact details and b) I`m f*cking stupid :clap

Second question - yes of course I can do an R1200GSA for you. price depends on attitude but if you add a fiver to whatever i charge on fleabay for the standard cover you won`t be far away. Like the bit about `superior machinery` though - that made me laugh matey!

Best regards,
 
R1200GS 1150 bermuda triangle explanation

Thats all I had - the plan was to design an 1150 one, laser it out bend it yada yada yada but the 1200 variant went on ok and Big fella was happy so there you have it!

:thumb
 
Mark Hooton said:
Ok mate, I will get one made for you and sent out in a couple of days. If there is any probs with the paypal payment I`ll get back to you but I am sure it`s fine. Please let me know when you get it and what you think - i`d also appreciate any feedback on the forum for other members. :clap
Click to expand...

Hi Mark, will you let me know when you post mine so I can leave a note for the postman to tell him where to stick it ! :jibber
 
Prezzie to yourself

Mate, I got it turned around today so, with luck, you should see it tomorrow.

Don`t go too overboard on the praise :bow I am bound to have screwed up somewhere :confused: cos I am clueless at the moment (soooooooooo busy) but with luck your shiny new Honda C90 L/h leg shield should be there for you :eek:

Let me know when you get it - any probs then I am here to put them right. Fitting is easy but call if you hare unsure.

:roll
 
Mark Hooton said:
Mate, I got it turned around today so, with luck, you should see it tomorrow.

Don`t go too overboard on the praise :bow I am bound to have screwed up somewhere :confused: cos I am clueless at the moment (soooooooooo busy) but with luck your shiny new Honda C90 L/h leg shield should be there for you :eek:

Let me know when you get it - any probs then I am here to put them right. Fitting is easy but call if you hare unsure.

:roll
Click to expand...

It was for a C70 but guess it will be the same :hide
 
Feedback

I ordered my Crud Catcher Sunday, it turned up in the post this morning. Now fitted & looking lovely! until it starts doing its job of course.

Nice piece of kit & very speedy service thanks,

JC
 
good!

Pleased you are pleased with the service and quality. I can`t do it all the time (life gets in the way) but I managed to turn yours round pretty quickly.

:thumb2
 
Update

Hi geezers, can`t remember if yours are specials or not i.e where I have had to change the logo from R1200GS to R1200GSA? The R1200GS is the standard (of course, it`s my ride) and, as an aside, a chappie has `commissioned` me to do an R850R for him - anyway I am talking bollocks again :)

So, regardless of what you have asked me for last night I did the new logo`s and put them onto some `blanks`, I have lasertime at 7am tomorrow for 1 hour before my manager gets in and gets arsey with me (yes, I own the gaff but f*cking around with 1/4 million pounds worth of laser cutting technology making bike parts coz I like it and can really pisses my crew off) :bounce1

Not only am I doing some `specials` (mebbe yours? - can`t remember, I am pissed most of the time - woohoo) but I am also doing some standards. once laser cut thats when the handcrafted stuff kicks in with the 1st stage finishing then CNC forming with each angle being checked and `rubbed` :clap then the 2nd stage finishing. if it then gives me the horn (a euphamism for `pleasing quality`) you then get it but only after you have promised to look after the baby I have made :roll

In practice, if I get all this done 2moz (IF) you will then get the Love Product posted out 1st class recorded and should (should) get it Friday mein lieblings :D

A caveat - 1) the best laid plans of mice and men & 2) If it aint horny it don`t go!

Hope this helps, geezers, and I hope you are as pleased as all else with something that is hand made, not in the millions, not from china and sold by the geezer who actually makes them!
 
Mark Hooton said:
Hi geezers, can`t remember if yours are specials or not i.e where I have had to change the logo from R1200GS to R1200GSA? The R1200GS is the standard (of course, it`s my ride) and, as an aside, a chappie has `commissioned` me to do an R850R for him - anyway I am talking bollocks again :)

So, regardless of what you have asked me for last night I did the new logo`s and put them onto some `blanks`, I have lasertime at 7am tomorrow for 1 hour before my manager gets in and gets arsey with me (yes, I own the gaff but f*cking around with 1/4 million pounds worth of laser cutting technology making bike parts coz I like it and can really pisses my crew off) :bounce1

Not only am I doing some `specials` (mebbe yours? - can`t remember, I am pissed most of the time - woohoo) but I am also doing some standards. once laser cut thats when the handcrafted stuff kicks in with the 1st stage finishing then CNC forming with each angle being checked and `rubbed` :clap then the 2nd stage finishing. if it then gives me the horn (a euphamism for `pleasing quality`) you then get it but only after you have promised to look after the baby I have made :roll

In practice, if I get all this done 2moz (IF) you will then get the Love Product posted out 1st class recorded and should (should) get it Friday mein lieblings :D

A caveat - 1) the best laid plans of mice and men & 2) If it aint horny it don`t go!

Hope this helps, geezers, and I hope you are as pleased as all else with something that is hand made, not in the millions, not from china and sold by the geezer who actually makes them!
Click to expand...

Hi Mark,

You said you had already done mine a couple of days ago so am wondering if it got lost in the post ? did you send it recorded or to be signed for ?


Mark Hooton said:
Mate, I got it turned around today so, with luck, you should see it tomorrow.

Don`t go too overboard on the praise I am bound to have screwed up somewhere cos I am clueless at the moment (soooooooooo busy) but with luck your shiny new Honda C90 L/h leg shield should be there for you

Let me know when you get it - any probs then I am here to put them right. Fitting is easy but call if you hare unsure.
Click to expand...
 
Mark Hooton said:
Hi geezers, can`t remember if yours are specials or not i.e where I have had to change the logo from R1200GS to R1200GSA? The R1200GS is the standard (of course, it`s my ride) and, as an aside, a chappie has `commissioned` me to do an R850R for him - anyway I am talking bollocks again :)

So, regardless of what you have asked me for last night I did the new logo`s and put them onto some `blanks`, I have lasertime at 7am tomorrow for 1 hour before my manager gets in and gets arsey with me (yes, I own the gaff but f*cking around with 1/4 million pounds worth of laser cutting technology making bike parts coz I like it and can really pisses my crew off) :bounce1

Not only am I doing some `specials` (mebbe yours? - can`t remember, I am pissed most of the time - woohoo) but I am also doing some standards. once laser cut thats when the handcrafted stuff kicks in with the 1st stage finishing then CNC forming with each angle being checked and `rubbed` :clap then the 2nd stage finishing. if it then gives me the horn (a euphamism for `pleasing quality`) you then get it but only after you have promised to look after the baby I have made :roll

In practice, if I get all this done 2moz (IF) you will then get the Love Product posted out 1st class recorded and should (should) get it Friday mein lieblings :D

A caveat - 1) the best laid plans of mice and men & 2) If it aint horny it don`t go!

Hope this helps, geezers, and I hope you are as pleased as all else with something that is hand made, not in the millions, not from china and sold by the geezer who actually makes them!
Click to expand...

Hi Mark - Just sent you the money via PayPal with requirements. Anytime will do as I appreciate you've generated a lot of business from this thread.:thumb2
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

Engine cover
Replies
3
Views
107
pitrat101
is there oil directly behind the front engine cover ?
Replies
16
Views
1,738
Pukmeister
Pukmeister
er-minio
Engine cover, final drive repaint.
Replies
5
Views
1,169
er-minio
er-minio
2009 GS Front engine cover removal tool?
Replies
3
Views
1,018
Mistacat
Mistacat
Front engine cover ( the black plastic one ) ??
Replies
5
Views
1,620
Bendy toy


Back
Top Bottom