Very sexy stainless lower engine cover

[chad]

Ok Bazza, I am pleased it is now in your safe hands. Be good to it, I love all my babies

Let me know how you get on, it`s easy peesy to fit but I am just a phone call away if you need any help.

Looks like I accidently uncovered a deep dark secret that, in the pits of all Tossers hearts lie a demonic secret and unholy passion for all things C90 eh?

Oi nuffin wrong wiv C90s

 

[Mark Hooton]

C90`s

ha, too true, when i was a kid i used to ride a stripped down one and hide in a ditch from the pigs when they came - ironically, quite a few of my mates are now pigs and my travelling companion and longtime mate is a Traffic Pig!

Have you ever seen the purple helmets?

 

[BeemerBaz]

Been sat in all day and chose to go out 30 mins ago to fit mine, here is a bad pic of it fitted, apologies for the grease, I am not going back to take more pics !!

I must say tho that its a quality product, a nice solid piece of art

Oh, and its a 10 mins job taking it slowly !!

 

[Mark Hooton]

well done

well done mate, it`s the right way round

 

[karlp]

Mark

I would like one of these with the GSA addition please.

How much is the cost and paypal to ?

thanks

karl

 

[Mark Hooton]

Catcher

Matey, £40.99 inc member discount and 1st class recorded delivery.

paypal to [email protected]

Please please make sure you spell out your order when you pay.

ta mate

 

[contact23]

R1200GSA

hi Mark, payment sent for GSA edition pm 'd you with my postal address


cheers

 

[spatuk]

ordered,mine last thursday at 11.00 am, arrived friday at 10.00 am what great service, didnt get discount because i orderd before the thread, but i dont care im very happy with the product
thank you spatuk

 

[Mort]

As I'm too lazy to look back through 6 pages

Do you plan to make these for the 1150?

 

[Mark Hooton]

1150 catchers for lazy boys

Here you are matey, take a look at Item number: 110462968604 on fleabay

 

[(RIP) Yamaha1]

Mark - guess the 1150GS one is the same size as an 1100GS - any thoughts about doing one with the 1100GS logo, especially for us........?

btw - did I see your name mentioned in AV8 mag - Sywell Aerodrome?

Mike

 

[Mark Hooton]

1100

Yep, i`d do anything for you

But seriously.

Here`s the deal - I am as busy as fuck although I am very happy to do one for you and charge the standard price because it`s easy for my simple mind to remember

But, in return i would be thankful if you could summerise the evolution of the GS for me? It is something I have wanted to do for a while now but lack the time and knowledge. What I am after is a timeline, say from the 1100, to date of all the variants? Could you help? If not it doesn`t matter because i`ll still do a special for you at the same price of the standard coz I am a good egg :cool

 

[fatbastard]

Got mine , cracking job.I think I might even manage to fit it . But being a real man will try to fit it first then when I balls it up look at the instuctions

 

[Mark Hooton]

Good

Good I am pleased. If all else fails use the instructions to light your joint with and then phone me.

 

[OzzieGSA]

Quote me happy

Hi Mark, I have an 09 1200GSA, how much for a plain or a 1200GSA engine cover, (Prefer plain Ireckon, but whichever is easier for you, posted to Adelaide, Australia? Shit loads of dirt roads out here, so reckon you could sell a few in Aus.

 

[Mark Hooton]

Crud catcher

Hi mate, I`ve already sold a couple `Oz Side` but for the life of me I can`t remember the postage because I`m either drunk or stupid most of the time. I will get back to you and let you know - it does cost more to laser the logo catcher but i don`t give a toss so I'm happy to send you the logo R1200GSA rather than the blank one at the same price if you do want one.

Will be in touch soon........

 

[Mark Hooton]

postage to Oz

Mate, I think £15 would cover it on a Royal Mail Small Packets delivery service. There is no tracking however and they quote about 5 days for delivery.

Seems cheap but if I`ve goofed (again) I`ll pay any diffenece if you order because I am not bothered about the money, I am more bothered about you being happy with one of my babies

 

[ExpatinIstanbul]

I will sell these in Turkey for you, you'll make loads of money. Please send me a FREE sample, no, make that 3 FREE samples. FREE. In fact you can send me some money with my FREE samples. And please make me some Alu Boxes.

 

[Mark Hooton]

samples and further business

Thank you for your post regarding the crud catchers. I would be very pleased to consider you, as an Agent, selling these on my behalf. I think that the economies of scale and the savings in bulk transport will return a good profit for you also if you are serious about it.

Please note that my profit margin is quite slim as I do not do this just for commercial gain, I have my own business (www.cymarc.co.uk) which makes all the money I need. These parts are something I do because I want to do it.

If you want to negotiate about becoming an Agent I would be pleased to do so but please be aware, to ensure sincerity, I would ask for payment upfront or pro forma before I let any goods leave my factory and I would have to apply good commercial sense.

I am very happy to send you samples however I will charge you for them as any business agreement may not be forthcoming. Because of the potential values involved I hope you understand that I need to apply commercial sense. Also, a long time ago I supplied a qty of samples based on the promise of selling loads of them and it never came to anything.

Sorry if this comes over as rather `businesslike` but, potentially, this is somewhat more than simply making a crud catcher at very low cost for a fellow biker who appreciates the workmanship.

I look forward to hearing from you if you are indeed interested in a business proposal.

Best regards and thanks again for your enquiry.

Mark Hooton.
Managing Director.
Cymarc Engineering Ltd.

 

[Yonkyo]

PM sent

I'll have plain one for my 2009 R1200GSA please.

£40.99 on its way.