Deleted Member MM
Guest
Georgia & I both have oil cooler guards & headlight protectors fitted to our R1200GS's.
Saw Georgia's oil cooler guard was missing mid way 'thru a run out yesterday, it suffered a mounting point fracture on one side, dropped down rubbed against mudguard & fork bridge
(marking both badly, fortunately it hadnt touched brake line) before the other side mounting gave way.
This morning noticed my h/light guard was sitting low on l/hand side.. checked & found l/h mount had fractured at point just to the front of indicator stalk.
If you have either be worth checking & possibly considering fitting rubber washer's to mounting points as IMO problem caused by vibration (could be why so many reports of fork bridge bolts coming slack??)
Saw Georgia's oil cooler guard was missing mid way 'thru a run out yesterday, it suffered a mounting point fracture on one side, dropped down rubbed against mudguard & fork bridge
(marking both badly, fortunately it hadnt touched brake line) before the other side mounting gave way.
This morning noticed my h/light guard was sitting low on l/hand side.. checked & found l/h mount had fractured at point just to the front of indicator stalk.
If you have either be worth checking & possibly considering fitting rubber washer's to mounting points as IMO problem caused by vibration (could be why so many reports of fork bridge bolts coming slack??)