Wanna know how well a 1300 gs survives a slide?

Fiddlesticks

Active member
UKGSer Subscriber
Joined
Jun 30, 2025
Messages
492
Reaction score
661
Location
Wirral
Thought this might be of interest. Had a bit of a lowside on a very slippery bend last weekend. Bike slid for around 4 seconds

Total damage: Both crash bars / bar protectors scraped (it flipped over at the end of the slide). Rear wheel hub plastic scratched. One rear footpeg slightly sanded underneath. Top box (givi XL one) lightly scratched. Centre stand - needed a touch of hammerite on the edge.

Bodywork - fine. Bars - fine. Mirrors - fine. Had to explain to the nice man who lives inside the handlebars that we were all fine.

IMG_20261114_141727.jpgIMG_20261114_141708.jpgIMG_20261114_141713.jpgIMG_20261114_122840.jpg

After a bit of sanding. Still not perfect. Aiming to get them powder coated.

IMG_20261114_160730.jpg
 
For it to slide and flip what speed were you doing? Mate of mine dropped his 1250 at a downhill junction at about 10mph - there was the smallest mark on the engine crashbar but that's was it! If it had been my bike would have probably been a write off!
 


Back
Top Bottom