WT’s new above number plate Denali bracket fitted today. Very pleased withit.
Weiser Wizard Rear Indicator with brake only Denali B6 connection
- Thread starter Jondd21
- Start date
Is that designed just for the BMW rack? I like the idea of having my B6 higher than below the number plate but I have a GIVI rack and top box so it probably wouldn’t fit. Plus I use that space for a little bag of essentials, though I could relocate that.
Looks like it fits below the luggage rack, using the existing couple of fasteners. I like the bracket but I'm not loving the tape holding the wire to the underside of the luggage rack. For me, I think it depends on whether or not there is an accessible route for wiring the light.
You can feed the cable through the same way as for the light on the bottom of the number plate or you can use the stick on cable clips (as shown in a previous post on the back of the number plate) if you prefer that to the tape.. I’m going to do the former but wanted to try it out first and also let others know about the new bracket..
Where the bracket is attached there's cable behind the panel - to supply the central locking for the top box, so I guess there's a way through somewhere? At least, that's how it is on my bike, which has the Topcase carrier option.
Just circling back to this...
Q1 was answered already. Without rear radar, it was only necessary to remove the number plate and plate holder in order to gain access to feed the B6 wire up in the under-seat area.
Q2. I asked Mark at Weiser. His response:
So, as I was fitting a B6, I used the wizards from my R1250GS and everything works fine.
I’m just about to press the button on this kit for my r1300……but which button to press?
Brake only or brake and rear? Now some of you have had for a while, thoughts please?
Second question is IF I just got the wizard kit indicators only, but installed the B6 light linked to a Hex easy can, can you via that get the brake function to work always, but the rear light function only at night?
Brake only or brake and rear? Now some of you have had for a while, thoughts please?
Second question is IF I just got the wizard kit indicators only, but installed the B6 light linked to a Hex easy can, can you via that get the brake function to work always, but the rear light function only at night?
Had my indicator and brake only for a while and would choose same again.
The only problem to me was indication whilst braking wasn't very clear.
The only problem to me was indication whilst braking wasn't very clear.
I've got the brake and rear running light, and I'd choose the same again. I have the running light set at 10%, which seems to be about the same brightness as the OEM running lights.
On my bike, using the wizards from the 1250, if the hazards are on, the OEM running lights and brake lights are off, so the B6 running light is necessary to keep the bike strictly legal.
As for the question about the rear light functioning only at night, I'm pretty sure that is not an option in the Hex configuration.
In certain parts of Europe you are not allowed a third tail light
Hence I only have brake light
Hence I only have brake light
Slight problem I'm encountering with my WIZARDS - RA/BR + B6 AUX BRAKE LIGHT on a 1300GS.
On 4 or 5 occasions in the last 1000 miles since the Wizards were fitted I've had a rear brake light malfunction warning on my TFT screen. When I remove this with the wizz wheel I then get a cruise control malfunction warning (obviously the c/c is linked to the braking system). The common facor seems to be that it happens after I am braking and indicating at the same time. On inspection one brake/indicator light and the Denali brake/running is out (so it's not a TFT malfunction) although the indicator still works. If I stop and switch off all rear lights then work as intended.
I sent Mark an email asking for advice and he rang me back...great service. He did say that there had been a few recorded issues like this a while ago but had generally been resolved by BMW software updates. Checking my software code showed that mine is out if date, so I hope that this will cure the problem when I have the bike serviced next Feb or March (I've more than one bike and will probably sorn the GS at the end of this month). A short tem solution is to disconnect the Denali running/brake light although I am reluctant to do this.
On 4 or 5 occasions in the last 1000 miles since the Wizards were fitted I've had a rear brake light malfunction warning on my TFT screen. When I remove this with the wizz wheel I then get a cruise control malfunction warning (obviously the c/c is linked to the braking system). The common facor seems to be that it happens after I am braking and indicating at the same time. On inspection one brake/indicator light and the Denali brake/running is out (so it's not a TFT malfunction) although the indicator still works. If I stop and switch off all rear lights then work as intended.
I sent Mark an email asking for advice and he rang me back...great service. He did say that there had been a few recorded issues like this a while ago but had generally been resolved by BMW software updates. Checking my software code showed that mine is out if date, so I hope that this will cure the problem when I have the bike serviced next Feb or March (I've more than one bike and will probably sorn the GS at the end of this month). A short tem solution is to disconnect the Denali running/brake light although I am reluctant to do this.
Thanks Mike R, hopefully as my bike is very new this wont be a problem. Good to know that Weiser are on it for customer service. I dont judge a company if there is a fault...that happens, but I do judge how they deal with it.
So true…. It’s not If a problem occurs ( things happen) but to me it’s how a company deal with any complaint , and from seeing WW , they appear to have excellent customer service , and a great product too.
I fitted the WW and brake/ tail light not long after getting my 13gs as I thought it was a far safer system than the original bmw idea.
I’m a very happy customer as the WW were easy to fit after watching the video, and it all works great.
Another thing id have never known about if it wasn’t for this fine forum.
Similar threads
