Whats a Nice T3 worth

[the civil one]

I have a notion that i fancy a T3 , its just another itch , that needs scratching
Now i know its like asking how long is a piece of string .
This bike is in great condition , not original.
Everything frame related that should be black is powder coated ,
New wires , new rims , lot of stainless in non stressed areas.
Lovely to look at , Down side is ,, its a single seat ? ..

76 BTW

 

[ghiribizzo]

Can't comment on price, but check that the clutch splines are ok - let the clutch out gently at idle till it bites. Can you get back from the bite by gently pulling in the lever and have it disengage? Or does it grab and move off? If so you're likely to need clutch centre, clutch plates and possibly a flywheel if they're worn and grooved...

 

[Nice 'n' Fat]

They look nice with a single seat

http://kayakpilot.com/MotoGuzzi.htm

 

[MarkShelley]

You may as well have a single seat as the buddy seat on the Cali as it isn`t big enough to take a pillion.

 

[the civil one]

Come on lads,, I know theres a few knowledgeable chaps out there..
Just an Idea ,

 

[abrasion]

calling Keith Chapman calling Keith Chapman

 

[(RIP) Kaister]

45 inches.

 

[Elle]

What's wrong with a single seat? ;-)
Besides, lots of spares around, many parts of 850 / 1000 models of the same era fit
Call Guzzibits - they bought the Guzzi stock from motoworks

 

[JayC]

What's wrong with a single seat? ;-)
Besides, lots of spares around, many parts of 850 / 1000 models of the same era fit
Call Guzzibits - they bought the Guzzi stock from motoworks

...and when loping along through France you can call in at Reboot!

http://www.rebootguzzispares.com/

 

[the civil one]

What's wrong with a single seat? ;-)
Besides, lots of spares around, many parts of 850 / 1000 models of the same era fit
Call Guzzibits - they bought the Guzzi stock from motoworks

Unfortunately they havent seemed to add much to it !
I am looking for an ECU for my 1100i and they hadnt one .

...and when loping along through France you can call in at Reboot!

http://www.rebootguzzispares.com/

Pete , since the French connection , has turned into a
think of a figure guy.
He sent me a picture of some parts he was trying to sell me ,
It was junk , but he did say it would be cheap ! .......

 

[Rob Farmer]

Unfortunately they havent seemed to add much to it !
I am looking for an ECU for my 1100i and they hadnt one .

.

Phil

Have you had a go at it yourself? Follow the links in this post

http://www.motoguzziclub.co.uk/forum/forum_posts.asp?TID=10956

 

[the civil one]

Phil

Have you had a go at it yourself? Follow the links in this post

http://www.motoguzziclub.co.uk/forum/forum_posts.asp?TID=10956

I sent it down to mick at Moto corsa , and he tested it .
Well and truly knackered .
I was going to re-chip her with a creedon chip anyways , so i have the
upgrade chip waiting , Pete has one , but asked me Eur250 for it ,
i can get a Ducati 748 , from Hills for £80/90 delivered , i think i will go the
Hills /Ducati route , they are all 16M Ecus , just the differing chips..

 

[pint6x]

Whats a nice T3 worth

Almost certainly more than you're prepared to pay for it

 

[the civil one]

Almost certainly more than you're prepared to pay for it

Helpful as always

 

[Devon]

This was put up on the Guzzi forum yesterday:

1978 T3 California. Excellent condition, fires up first time and ridden most days. MOT til April 2013. Lots of original parts, including screen, and almost complete service history (classic bike specialist Victory Motorcycles has overseen bike for last decade). Owned bike since 1999 and only two previous owners. £3,299 ONO.
Robert 07985 734668 or [email protected] (Camden Town, London)