Delboy777
Registered user
Can anyone tell me if the Wunderlich infill panels fit with the standard seat in the low position ? Im lead to believe they dont with the Low seat unit.
Wunderlich
- Thread starter Delboy777
- Start date
I had some on my 2005 GS and they fitted just fine with the seat in the low position.
Delboy777
Registered user
Fair enough, tried em on today and discovered they wont fit when you have a Mudsling Max on 
That's odd as I have the infil panels on my 2008 GSA and I also have a mudsling. Although its not the max everything fits fine 
Jon
Jon
Delboy777
Registered user
That's odd as I have the infil panels on my 2008 GSA and I also have a mudsling. Although its not the max everything fits fine
Jon
I tried them on yesterday Jon and the bracket that holds on the Max is in the exact same place as the clip for the infills needs to be attached to the chassis rail
I might get around it by doing a little cutting of the edge of the bracket on the Mudsling but i dont want to do that. ive got wunderlich infills and mudsling max,all fits perfectly i think you have angled the bracket wrongly,btw my bike is 2012 but had the panels on 2010 and 2008 gsa
Delboy777
Registered user
Are your clips forward of the Mudsling mounting point (where the tie wrap goes) ?
give me five i will post a pic
Delboy777
Registered user
juddadredd
Registered user
How much did you pay for your panels? As mine cost me 12 cable ties 2 bits of left over rubber and 20 minutes of my free time.
http://cannedzombie.com/r1200gsa/LSIDE.JPG
http://cannedzombie.com/r1200gsa/RSIDE.JPG
If I'd had another pair of hands then of course they'd be tighter and look prettier but I was all by myself and it was cold, so I will make do with these as they work and keep all of the road spray and asorted crap off of me.
http://cannedzombie.com/r1200gsa/LSIDE.JPG
http://cannedzombie.com/r1200gsa/RSIDE.JPG
If I'd had another pair of hands then of course they'd be tighter and look prettier but I was all by myself and it was cold, so I will make do with these as they work and keep all of the road spray and asorted crap off of me.
Delboy777
Registered user
juddadredd
Registered user
LMAO you know it and the Bar Muffs and Rear Crap Shield are made from an old wet suit, so now its rubber cable ties and neoprene, and lighty buffed with baby oil so she's all shiny.
Shame I don't treat the misses in the same way.
Shame I don't treat the misses in the same way.
It took me a while to get it all to fit nice as the clips can be reversed and it made fitting them a bugger
Then the penny dropped and all was fine, glad you got it sorted ok
Jon
Then the penny dropped and all was fine, glad you got it sorted ok
Jon
Similar threads
