bike-jota
Registered user
Hi there, I've tried to look for posts similar to my problem but I dont seem to find anything related.
Issue: not enough voltage at battery terminals = 11.78V
New battery (second one just replaced)
Battery voltage by itself=11,78v
Battery connected to terminals, ignition off=11,78V
Ignition switch on, bike off=11.56V
Bike on= 11.25V at battery terminals (this should be 14.5v) -
Regulator output=14.9V
Alternator terminals output= 23v idle
Alternator terminals output at 4000rmp = 77V
Additional information: I've just replaced the rectifier/regulator. I have datatool alarm installed for about 3 years
Fog lights installed about 2 years ago
My battery started to drain about a year ago, I have not used my bike since about 8-10 month ago
Any ideas would be greatly appreciated
Thanks
Alex
Issue: not enough voltage at battery terminals = 11.78V
New battery (second one just replaced)
Battery voltage by itself=11,78v
Battery connected to terminals, ignition off=11,78V
Ignition switch on, bike off=11.56V
Bike on= 11.25V at battery terminals (this should be 14.5v) -
Regulator output=14.9V
Alternator terminals output= 23v idle
Alternator terminals output at 4000rmp = 77V
Additional information: I've just replaced the rectifier/regulator. I have datatool alarm installed for about 3 years
Fog lights installed about 2 years ago
My battery started to drain about a year ago, I have not used my bike since about 8-10 month ago
Any ideas would be greatly appreciated
Thanks
Alex