Fitting AS7 Autoswitch

Mick_rw

Mick_rw

Registered user
Joined
Mar 8, 2003
Messages
2,341
Reaction score
0
Location
Andover, Hampshire
Has anybody carried out the installation of the AS7 Autoswitch, which enables fog lights to be switched on/off thru the indicator cancel switch.

I have a copy of the installation instructions from Autoswitch, but am not sure which wire on the cancel switch to use. It was real easy on the 1150 but not so simple on the 1200.

Have done a search of the forum with no luck.....:D
 
AS7 Autoswitch Pictures....

Marki_GSA said:
search for autoswitch and it is the 8th post bellow yours cunningly called AS7 Autoswitch. Here it is anyway http://www.ukgser.com/forums/showthread.php?t=278081&highlight=autoswitch
Click to expand...

Followed the instructions as per Marki_GSA's link, good set of instructions, as they lacked any pictures have added a few here.

These show just the wiring for the actual switch.....

This is the connector refered to in the instructions....

AS7-1.JPG


AS7-2.JPG


AS7-3.JPG


AS7-4.JPG


AS7-5.JPG


The relay I fitted by the battery under the seat, makes thing easier if relay needs swapping out........

AS7-6.JPG
 
Useful thread & yes I'm resurrecting it !
What was the connection into the red/green wire used for ? Is that an ignition-live ?
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.

Similar threads

L
autoswitch AS5NB2 power issue
Replies
4
Views
834
Steptoe
Steptoe
haydw
Another Autoswitch AS7 fitting question
Replies
2
Views
1,560
Buckingham
Buckingham
ShakeyGS
Autoswitch AS7 trigger on a GS LC TE
Replies
0
Views
1,659
ShakeyGS
ShakeyGS
Nippy Norman Autoswitch
Replies
9
Views
2,761
topcat2006
Nippy Norman AS7 AutoSwitch Question
Replies
5
Views
4,168
Deleted account 190920001


Back
Top Bottom