1100/1150 rear ends

[MarkShelley]

Are they the same? I am referring to the shaft drive/swinging arm and brake caliper and caliper mountings.

 

[Pauly S]

they look different to me

as above

 

[elevensies]

shaft drive housing different

 

[(RIP) ugg]

Are they the same? I am referring to the shaft drive/swinging arm and brake caliper and caliper mountings.

different brake caliper mounting, because of shape of swing arm (Final drive) end.
if yer wanting to use a 1150 caliper on a 1100 swing arm it wont fit, if it did id of tried it by now




ugg

 

[Colban]

The swing arm is different (Lower shock mounting).
The 1100 rear brake caliper,p/n 3421 2333 165 is also used on 1150s. up to 11/2001.Check parts on here.
http://www.maxbmwmotorcycles.com/fiche/fiche.asp

 

[MarkShelley]

Thanks for that. There is a carbon hugger for an 1150 on ebay and I wondered if it would fit my 1100. Obviously not!

 

[elevensies]

you may get it to fit??

if its cheap enough, cos they do have a habit of breaking

 

[Fanum]

A carbon hugger, on an 11xx?

Get ye gone to the 1200 section sirrah...you have no place here!!!

 

[MarkShelley]

A carbon hugger, on an 11xx?

Get ye gone to the 1200 section sirrah...you have no place here!!!

Would it be acceptably butch for you if I swim out to Ailsa Craig and swim back with a lump of granite on my back then sculpt a hugger from it using just my tool kit?

 

[Steptoe]

Thanks for that. There is a carbon hugger for an 1150 on ebay and I wondered if it would fit my 1100. Obviously not!

It should fit.

People swop 850/1100/1150 final drives from bike to bike.

Drive shafts and swingarms are different.

 

[John Armstrong]

The Ilmberger = Wunderlich hugger has the same part number IIRC for the 1100 and 1150.

Is the ebay one a pyramid one

 

[MarkShelley]

The Ilmberger = Wunderlich hugger has the same part number IIRC for the 1100 and 1150.

Is the ebay one a pyramid one

It is. Why, is it yours?

 

[John Armstrong]

It is. Why, is it yours?

No, just thinking of getting a hugger for my 1100, and no point ingetting into a bidding war.

 

[MarkShelley]

No, just thinking of getting a hugger for my 1100, and no point ingetting into a bidding war.

I thought that was the whole idea of auctions
I have just looked on the Pyramid website and they show different part numbers for the 1100 and 1150 huggers so it would be a risky business. I am not averse to a bit of risk mind

 

[John Armstrong]

Just been looking at the Motorworks website, and the Pyramid ones have different part numbers, but the Ilmberger ones don't

http://www.motorworks.co.uk/bmw/pro..._15_30_NM_15&header_text=&header_text_image=0

 

[motobiker]

I've the cheapo plastic 'pyramid' hugger on my 1100.. and it does a fantastic job of keeping my shiney new rear wilbers.. err.. shiney and new.

it does need trimming slightly as it does on occasion knock against the exhaust.. usually going over road humps at naughty speeds. But I simply can't be bothered with messing about with it further.