1150 GS/A Spotlight mounting Bar

[Bigyin]

Dave

My kit arrived this afternoon so no need for you to threaten the local Post Office anymore

Will get round to fitting it as soon as i get the chance ............ thanks again

 

[Bigyin]

ta daaaa

All sorted and the problem with the left one was the bulb as i managed to test all the wiring with a borrowed meter .............thanks again David

 

[ilegal]

Finally installed on my bike ¡!!

By the way the cable for the low beam on my bike is white with yellow strip and for the side lamp is Grey with black strip.

I use the White with Yellow strip just by plug in the cable into the connector in this picture.

 

[how much]

Alex,
your kit is on its way to Norther Ireland this morning, thanks for your order, should be with you before next weekend... thanks

the Christmas post and the snow may cause some delay to the usual delivery times, anyone fancy a light kit before Christmas best get your order in by the end of next week

thanks

David

 

[how much]

Merry Christmas and Happy New Year

to all my lightbar/lightkit customers in 2010 amazing how many countries i have shipped too considering this thread UKGSER is the only place i advertise them


thankyou everyone! and yes i have stock if you want to order one for the Christmas holidays

thanks again

David

 

[Mort]

Gails turned up on Christmas eve, nice timing Santa

 

[rsstler]

Switch mount

Got my spots and fitted them no problems. Great piece of kit; I’m very impressed with the components and build quality.

The only niggle I had was mounting the switch. It’s hanging lose until I find somewhere to mount it properly.

What’s the best way to mount the switch? Is anyone proud of their work who wants to share some pics?

I’m running low on space on the handlebars, what with SatNav ram mounts and StarCom ext controls. So I’ve been pondering about mounting the switch on the beak. Either drilling a hole just in front of the aux power socket (1150gsa) and bolting it in or even highjacking the aux socket itself. Has anyone done this?

Thanks

 

[how much]

Got my spots and fitted them no problems. Great piece of kit; I’m very impressed with the components and build quality.

The only niggle I had was mounting the switch. It’s hanging lose until I find somewhere to mount it properly.

What’s the best way to mount the switch? Is anyone proud of their work who wants to share some pics?

I’m running low on space on the handlebars, what with SatNav ram mounts and StarCom ext controls. So I’ve been pondering about mounting the switch on the beak. Either drilling a hole just in front of the aux power socket (1150gsa) and bolting it in or even highjacking the aux socket itself. Has anyone done this?

Thanks

see post #124 for a neat switch install with a simple bracket

or

do as most do... just cable tie and black electrical tape it onto the clutch line

hm

 

[rsstler]

Thanks How Much, I've cable tied the switch to the clutch cable

 

[how much]

No VAT increase to be passed on.......

that is all

 

[how much]

sorry guys
been quite ill for 2 weeks and have not been responding to requests for bars and kits....

am just back in the land of the living and will catch up as best i can

thanks

David

 

[Ash]

sorry guys
been quite ill for 2 weeks and have not been responding to requests for bars and kits....

am just back in the land of the living and will catch up as best i can

thanks

David

fun this unwell lark isn't it David
GWS

 

[how much]

everything back to normal re- deliveries etc...

lightbars off to Preston and Sweden

2 lightkits off to Northern Ireland

thanks for your orders Gents


David

 

[Martin S]

Do you have a light bar for a 1200 - 2010 model please?

Thanks

 

[how much]

Do you have a light bar for a 1200 - 2010 model please?

Thanks

sorry i do not supply bars for the 2007-on 1200gs

 

[blues_bleu]

still have the bar for R1100GS?

 

[MattW]

still have the bar for R1100GS?

I can recommend them

<a href="https://picasaweb.google.com/lh/photo/uG2z6iial3y_zqa4DikW4bAq9-mBC2NhkbiENXYqClA?feat=embedwebsite"><img src="https://lh5.googleusercontent.com/_SSn2CtCOKnU/TMgkgq9a1uI/AAAAAAAAEI4/Oo2JihqK5x4/s800/P1000824.JPG" height="800" width="534" /></a>

 

[how much]

still have the bar for R1100GS?

wont be for a week or so... am manufacturing a new batch that are just blanks at the minute


David

 

[blues_bleu]

wont be for a week or so... am manufacturing a new batch that are just blanks at the minute


David

sure.
let me know when it's out of the oven.
wanna check how much do it cost to have it ship over to singapore?
760364. just the bar alone.

thanks

 

[Chrizm]

How much are the 1100 light bars posted in UK?