1150 GSA givi top box

[eden warrior]

Anyone fitted a givi top box to a GSA any advice on what plates fittings required

 

[Fanum]

Anyone fitted a givi top box to a GSA any advice on what plates fittings required

There's a specific kit.

Givi website

 

[eden warrior]

Thanks for the reply have been on there site it only does the 1150 will this fit the GSA or like you say it is a specific kit

 

[warmshed]

This site gives a great solution, http://edelweiss.smugmug.com/Motorc...re-GiVi/2795778_jVHS4S#!i=149159882&k=Qcth6MK I have bought a piece of stainless plate but have not got round to making it yet.

I just bolted the universal givi fixing plate http://www.ebay.co.uk/itm/GIVI-Z113...85?pt=UK_Motorcycle_Parts&hash=item1c445e886d direct to the rear rack. I removed the grab handle to enable the plate to be fitted a far forward as possible without interfering with the pillion space. I can supply a picture if you want.

Regards Dave

 

[Redsprocket]

Hi, no it's a specific kit for the GSA.
I had one on my 2003 1150 GSA, I happen to have it in the garage if you need one, I'm sure a deal could be done... bloody heavy to post though!

 

[eden warrior]

Hi Dave could you post a picture it would be handy to see what it looks like
Regards pete

 

[Redsprocket]

[/IMG]

Here's the Givi one on the bike, I do have pictured of it off it if that's what you want

 

[Baggers1]

I used a Givi universal baseplate when I had a GSA seat, it worked fine

 

[eden warrior]

Hi redsprocket could you send a photo of it off and which kit did you fit thanks for your help

 

[eden warrior]

Hi redsprocket could you send a photo of it off and which kit did you fit thanks for your help

Or if you have the kit how much do you want for it

 

[MattW]

Sales in the sales section please chaps.

 

[Juanlap]

Givi did do an 1150GSA specific kit, part no. E192. I got lucky and found one last month for £40. Some dealers might still have one kicking around if you do some googling. It's a doddle to fit, I've just attached a 52L Givi Trekker box to it. Hope that helps.