1150GSA Fuel Hose

[Triton]

I am no where near my service manual at the moment and I was hoping someone out there might be able to help me please and let me know the ID of the fuel hose for a 2005 1150GSA???

Thanks a heap in advance!

 

[Banjaxed]

Which one?

There's three quick disconnects below the tank on mine, so a bit more info perhaps?

Don't forget, there is an online parts catalogue here.

 

[Triton]

Hi Banjaxed,

Thanks for the link I spent ages trying to find that? I am looking for the diameter of the hoses the quick connects are connected to. I don't know wether they are 1/4" or 5/16" - Unfortunately the online manual only indicates 13mm for the hose - which seems a very BIG internal diameter (maybe)? So any info I can get on the internal size where the quickconnects go in would be great.

Again thanks!

 

[Voyager]

Hi,

A quick trip to my 2004 1150GSA spares box produced a pair of connectors - see pic.

The external pipe diameter (that equals the internal diameter of the hose) is 9mm / 3/8"

Hope this helps.


Bob.

 

[Colban]

Hi Banjaxed,

Thanks for the link I spent ages trying to find that? I am looking for the diameter of the hoses the quick connects are connected to. I don't know wether they are 1/4" or 5/16" - Unfortunately the online manual only indicates 13mm for the hose - which seems a very BIG internal diameter (maybe)? So any info I can get on the internal size where the quickconnects go in would be great.

Again thanks!

The internal diameter is 8mm for the pipes.
Use only injector quality hose that can take a minimum of 3Bar (42PSI i think) pressure and suitable hose clips.
This may help for p/n.
www.maxbmwmotorcycles.com/fiche/MainDiagrams.asp?mospid=47995