1150GSA wind buffeting

[Zippy]

I got a Cee Baileys large screen and a set of Turbinators in the for sale section.
The screen was a little on the large size at first so i got to thinking what if I turn the Turbinators up side down ,so the adjusters are facing down. This worked very well and I am getting very little if any buffeting or wind noise and I can adjust the gap between screen and the cockpit
Still testing and adjusting but the results are v good.

Hi, can you post a piccie? my brain is struggling to visualise how they work upside down...

Cheers
Steve

 

[Roge]

Its summer there in the UK, During summer here I remove the screen, you get wind blast but its not turbulant and a great way to ride. If the weather gets iffy but the screen back on its only minutes of effort.

 

[Banjaxed]

Z-Technik

Hi - the Z-Technik is a straight replacement for the standard screen and doesn't use the plastic spacers that the Adventure screen does. The screen I have is the Z2240 shown here. Now, be careful, this is a TALL screen, so unless your sitting height is 40" plus (your actual height minus inside leg), you may end up trying to look through it - not recommended.

I use the Tobinators in a pretty much vertical position, front and back and it seems to work well. You'd need standard (not Adventure) Tobinators with this screen.

Boy, there's endless opportunities for fiddling with screens...

 

[bugeyes]

i will post a pic today to show you what i have done

 

[Thermal]

I'm also 6'2" and couldn't stand the stock screen. After doing some reading, I bought a new screen from Aeroflow. They were not very far away, so I bought it directly from the mfg. What a difference! It it quite expensive ($500), and I think rather ugly too - but for me it's all about the ride, so well worth it ...