1967 bonnie t120r

[niko]

hi guys thort you might like to see my bonnie ive just finished
and unfortunately needs to be sold .the work ive done on this is silly thousands spent on engine parts / machining alone

http://pic40.picturetrail.com/VOL359/7011700/21926262/362184369.jpg

http://pic40.picturetrail.com/VOL359/7011700/21926262/362184428.jpg

 

[(RIP) Proff]

FFS !!!!
Don't let Rob Farmer see this

 

[niko]

FFS !!!!
Don't let Rob Farmer see this

whys that ? (im a newby here)

 

[cookie]

very nice.

mikunis, konis?

 

[niko]

very nice.

mikunis, konis?

yep and !!!

New big ends, small ends flywheel lightened and dynamically balanced, new main bearings
Con rods mirror polished and stress tested
3134 profile cams fitted to ex and in, with new bushes fitted
Valve timing done to suit
Rebored with new pistons/rings (and balanced) new cam follower guide blocks fitted
New stelite valves, springs etc reground, unleaded seats fitted
cylinder and head skimmed
New tappets (alun key adjustable)
New pressure release valve
New seals, gaskets
New clutch basket, centre, spider Cush rubbers bearings, lightened friction plates, one extra plate fitted)cast clutch pressure plate with needle roller bearing
Gearbox rebuilt
All new sprockets, new primary chain and final drive chain
Mikuni carbs fitted
Boyer ignition, tiptronic black box new coils
Proper Engine breather fitted in and ex
Ignition timing done properly
Carbs set up properly
New swing arm bushes, steering head bearings.
Bar risers fitted to get rid of crap triumph p bolts
New battery
Koni dial a ride shocks, and up rated front springs
New metzler tyres front and back

 

[cookie]

yep and !!!

New big ends, small ends flywheel lightened and dynamically balanced, new main bearings
Con rods mirror polished and stress tested
3134 profile cams fitted to ex and in, with new bushes fitted
Valve timing done to suit
Rebored with new pistons/rings (and balanced) new cam follower guide blocks fitted
New stelite valves, springs etc reground, unleaded seats fitted
cylinder and head skimmed
New tappets (alun key adjustable)
New pressure release valve
New seals, gaskets
New clutch basket, centre, spider Cush rubbers bearings, lightened friction plates, one extra plate fitted)cast clutch pressure plate with needle roller bearing
Gearbox rebuilt
All new sprockets, new primary chain and final drive chain
Mikuni carbs fitted
Boyer ignition, tiptronic black box new coils
Proper Engine breather fitted in and ex
Ignition timing done properly
Carbs set up properly
New swing arm bushes, steering head bearings.
Bar risers fitted to get rid of crap triumph p bolts
New battery
Koni dial a ride shocks, and up rated front springs
New metzler tyres front and back

pity it's not standard. i'll give you £500 for it

 

[(RIP) Proff]

whys that ? (im a newby here)

Cos he'll start drooling

 

[niko]

Cos he'll start drooling

 

[niko]

pity it's not standard. i'll give you £500 for it

its better than standard ,the engine is now put together properly ,and breaths instead of chokes
carbs work instead of the monobolocks crap good shocks instead of bed springs ,its build to ride not to take it trailers

you can buy a photo for £500

 

[daveg]

How much are you looking for Niko? Send me a pm if you'd like to talk.

Cheers,

David

 

[Rob Farmer]

 

[niko]

How much are you looking for Niko? Send me a pm if you'd like to talk.

Cheers,

David

hi mate i dont seem able to send pms ,do i need to be a subscribed member for this?
what is forum etiquette for putting up prices ?
ive answered my own question and paid up!!
pm sent mate

 

[Rob Farmer]

You're supposed to advertise your bike with a price.












And give a huge discount to moderators

 

[niko]

You're supposed to advertise your bike with a price.












And give a huge discount to moderators

ill put up a for sale thread (strangly anough in the for sale bit!!)