2013 RT Changing R/H Headlight Bulb

[dr nosh]

 

[Kritou]

1. Remove RHS fairing
2. Kneel on a cushion facing light unit
3. Grope blindly inside front cowl until sftuucpkiingd wire clip is dislodged
4. Disconnect wiring
5. Cup of tea
6. Wedge a length of stiffish plastic tube over end of light fitting
7. Reposition cushion to peer into cowl
8. With left hand holding plastic tube, offer up, position, and hold new bulb in place
9. With a longish screwdriver in t'other hand coax clip back on
10. Reconnect wiring
11. Test bulb now works
12. Reassemble bike

Still thirty minutes out of one's life ......

 

[andy5329]

Made me laugh.. Yep done the same minus cushion.. Your posh!!!

 

[Posh Pete]

http://www.ukgser.com/forums/showth...t-changing-the-headlight-bulbs?highlight=Bulb

Post 13

I feel your pain!

 

[stever1]

As per the manual. take off the side panel of the fairing, makes it much easier.

 

[Cortina]

1. Remove RHS fairing
2. Kneel on a cushion facing light unit
3. Grope blindly inside front cowl until sftuucpkiingd wire clip is dislodged
4. Disconnect wiring
5. Cup of tea
6. Wedge a length of stiffish plastic tube over end of light fitting
7. Reposition cushion to peer into cowl
8. With left hand holding plastic tube, offer up, position, and hold new bulb in place
9. With a longish screwdriver in t'other hand coax clip back on
10. Reconnect wiring
11. Test bulb now works
12. Reassemble bike

Still thirty minutes out of one's life ......

I suspect before you get to 3 , you will need to remove the plastic cover ..... eh ??

 

[Kritou]

I suspect before you get to 3 , you will need to remove the plastic cover ..... eh ??

That is kept on a shelf somewhere in the shed ...