A little help with bolts sizes...

[Smythson]

Afternoon all,

I've managed to lose two out of three of the bolts holding my front sprocket guard in place and cannot find them on the realOEM listing for some reason.

Is there a kind soul out there that could direct me to the size/length/type of the bottom two bolts?

S

 

[v8legend]

This page shows the bolts. I'm not sure which goes where though.

http://www.realoem.com/bmw/showparts.do?model=0219&mospid=51597&btnr=11_4219&hg=11&fg=14

 

[siwhite]

Looks like 1x M5x12mm and 2x M5x25mm.

If you can wait until tomorrow I can tell you where they go.

 

[Smythson]

Many thanks for the quick responses! The main reason i don't go to BM for these things is that they charge for one screw what i can get 10 or 15 of on eBay!

v8 - I was looking in the panels section of realoem

si - The top one i do have left is the button head and the remaining two must be the cap head m5x25s. Thank you for the offer though.

Must've forgotten threadlock last time i was in there

Best,

S