Adding fob to DWA

[Artfullbodger]

Hi All
Im looking for advice regarding adding a fob to my DWA basic, I have fitted the box to the bike and it works when set to arm automatically but does nothing with the fob, Im using motoscan ultimate but I can't seem to find any settings to add the fob , any suggestions would be welcome
TIA

 

[Ianr]

Not familiar with Motoscan but when I added the DWA to my bike (2022) via gs911 to get key fob pairing with the alarm I had to go into 2 controllers plus the TFT from memory. I'm pretty sure the second one was the key controller (first was DWA). Not much help but may point you in the right direction if you've not tried that already. If no joy see if somebody locally with a gs911 may be willing to use a vin registration and help you out. I'm too far down here in Devon to help.

Plus this if you haven't seen it https://www.ukgser.com/community/threads/attempting-to-retrofit-dwa-alarm-unit.318693/

 

[Artfullbodger]

Not familiar with Motoscan but when I added the DWA to my bike (2022) via gs911 to get key fob pairing with the alarm I had to go into 2 controllers plus the TFT from memory. I'm pretty sure the second one was the key controller (first was DWA). Not much help but may point you in the right direction if you've not tried that already. If no joy see if somebody locally with a gs911 may be willing to use a vin registration and help you out. I'm too far down here in Devon to help.

Plus this if you haven't seen it https://www.ukgser.com/community/threads/attempting-to-retrofit-dwa-alarm-unit.318693/

Cheers for that Ian, as far as Im aware it cant be done with Motoscan, but there is a way manually by using the buttons on the remote but I can only find the instructions for the earlier ones which dont seem to be working for me.