advice needed for valuation for a pd

[fizzer]

i know nothing of air heads,so can someone tell me what this is worth its a r100gs pd,,its a genuine one and its on the v5 that its a pd
it was one of the last ones everbuilt apparently.its in red and white
its done just over 100 thousand miles but had a full nut and bolt restoration about 5 years ago and is now in mint condition
hopefully i should have some photos to show you in a day or two
so anyone know whats its worth
thanks fizzer

 

[DrFarkoff]

Being truthful ??

What someone is prepared to pay for it

If its Really Tidy ?? Stick it on e bay for a start of £8500

If its rough £3k ???

 

[Bubb]

Also depends on who did the restoration, and what was done.

£4k - £10k depending.

 

[fizzer]

a couple of photos
it had the full rebuild including an engine and box rebuild
it was done by a retired engineer,thats as much as i know

 

[Bubb]

Looks okay.
Stick it on eBay starting at £7.5k and see what happens….
Good luck

 

[fizzer]

mmm ok thanks,it belongs to a mate of a mate ,he offered it to me for 6000 ,i dont think i am going to bother.
if anyone wants it let me know i can pass on his number
bike is in tyne and wear area

 

[Steptoe]

a couple of photos
it had the full rebuild including an engine and box rebuild
it was done by a retired engineer,thats as much as i know

I’ve yet to hear of a rebuild that wasn’t done by a retired engineer….. there’s thousands of retired engineers out there seemingly all currently doing bike and car rebuilds

 

[fizzer]

Yes I know...all the blah blah.

 

[Rob Farmer]

Its got a shitty exhaust on it so isn't going to run as well as it should. Cheap rear shock and cast iron front disc that's going to warp very soon. Non standard spray job. Nowhere near mnt condition

 

[oldnfat]

Its got a shitty exhaust on it so isn't going to run as well as it should. Cheap rear shock and cast iron front disc that's going to warp very soon. Non standard spray job. Nowhere near mnt condition

There’s quite a bit wrong with this bike…adding to the list, the bra is missing, so is the skid plate and the Bala e covers..and as for the front rota, a death trap in the wet….plus all the crap lying around in the back ground. Wouldn’t touch it with a barge pole.

 

[Tbolt]

Why was the oil cooler removed?