Aftermarket brake and clutch levers.

[Scubaregs]

Has anyone found any aftermarket levers for the R1300rs?

I find the clutch lever a bit of a stretch even at it's closest position, exacerbated by the biting point being so close to the end of travel.

 

[AndyW]

I have a pair of Puig 4.0 Foldable Clutch/Brake levers to sell that I didn't get round to fitting on the bike.
I'll post pics / details when I get home later.

 

[Scubaregs]

Hi Andy, I've read conflicting reports re the Puig as to whether they will fit or not, some sites saying yes, others no.

 

[AndyW]

I bought them from pyramidmoto.co.uk
Might be worth firing an email at them (and/or https://puigusa.com/en) re the issues you've seen reported.
Always found Pyramid customer service excellent.

 

[leadfarmer]

Thread here about how to adjust it, I presume it's the same as the GS

Otherwise the VMT levers I was going to get look very good for the money

Thread 'R1300GS clutch lever adjustment'

Apr 9, 2025

I’ve just adjusted the throw of my clutch lever to bring the bite point closer to the handlebar, I have the standard levers, not enduro and even on the closest of the 3 settings the bite point was too far out

Thought I’d post here how to adjust it further, BUT ! Before you touch your bike be aware that my dealer said the lever couldn’t be adjusted
The 1200s had the same system so this is nothing new but most folks aren’t aware of it

Disclaimer - it’s very simple to do but you need a bit of mechanical feel, if you aren’t confident with tools leave it alone!

Underneath the lever there...

• leadfarmer
• Replies: 35
• Forum: 1300 GS

• 

 

[Scubaregs]

This is what I found on Puig's website,
"Lever adapters are essential if this is your first order of PUIG levers for your motorcycle. These adapters are compatible with all our versions and generations of levers.

Not compatible with BMW R1300GS/R1300RS/R1300R model with the Riding Assistant package that includes the FCW function (Front Collision Warning)"

I do have riding assistant, but in Dynamic pro you lose the FCW anyway. Will see if I can drop them an email to see if that is the only issue with fitting.

 

[AndyW]

Adapter - brake. Sku: M21893N RRP £34.80
Adapter - clutch. Sku: M21892N RRP £34.80
Lever - brake. Sku: M4210AR RRP £50.40
Lever - clutch. Sku: M4110AR RRP £50.40

Unused
£145 + £5 p&p

 

[Scubaregs]

Thread here about how to adjust it, I presume it's the same as the GS

Otherwise the VMT levers I was going to get look very good for the money

Thread 'R1300GS clutch lever adjustment'

Apr 9, 2025

I’ve just adjusted the throw of my clutch lever to bring the bite point closer to the handlebar, I have the standard levers, not enduro and even on the closest of the 3 settings the bite point was too far out

Thought I’d post here how to adjust it further, BUT ! Before you touch your bike be aware that my dealer said the lever couldn’t be adjusted
The 1200s had the same system so this is nothing new but most folks aren’t aware of it

Disclaimer - it’s very simple to do but you need a bit of mechanical feel, if you aren’t confident with tools leave it alone!

Underneath the lever there...

• leadfarmer
• Replies: 35
• Forum: 1300 GS

• 

Thanks, someone gave me this info on one of the facebook groups. I could not get the grub screw loosened and gave up before stripping it.