Aluminum cases BEGR

[Bolt on Billy]

Is there anyone out there?

Is threre anyone out there who has seen, touched, smelt or even purchased a set of these lovely looking boxes? I am so tempted.

 

[Thunder]

Is threre anyone out there who has seen, touched, smelt or even purchased a set of these lovely looking boxes? I am so tempted.

Doubt it, but I'm sure its only a matter of time.

 

[Bolt on Billy]

A price please

Hi Bystricke,

I would like a price please for:

1x 36l top box
1x 45l pannier ( suitcase)
1X pannier (suitcase) with 'cut for exhaust'

all in black,with frames and delivery to France.

Is the rack/frame for the 850/1100 top box like the one for the 1200, with handles, have you a photograph?

BoB

 

[bystricke]

Hi Bystricke,

I would like a price please for:

1x 36l top box
1x 45l pannier ( suitcase)
1X pannier (suitcase) with 'cut for exhaust'

all in black,with frames and delivery to France.

Is the rack/frame for the 850/1100 top box like the one for the 1200, with handles, have you a photograph?

BoB

Hello Bolt on Billy,

I made symmetric frames for the panniers on R 1100GS, R1150GS - GSA, R1200GS - GSA.
I can't make asymmetric frames and frames with cut for exhaust. You can buy in from Touratech AG. If you have these frames, it isn's problem buy the BEGR panniers with mounting set for this frames.
I can send the panniers by parcel service PPL across Europe.
I am looking for means of transport and the price to Australia.

1x 36l top case .......................................... 220 €
1x 45l pannier .......................................... 220 €
1X pannier (suitcase) with 'cut for exhaust' ..... 248 €

 

[Gany]

How can I get in touch regarding orders etc? Will you sign up here so I can PM you or do you have an email address? Can you sell just the mounting kit on its own? Do you have a photo of the inside of the pannier with the pucks mounted (are they easy to remove without tools)? Thanks again.

 

[bystricke]

How can I get in touch regarding orders etc? Will you sign up here so I can PM you or do you have an email address? Can you sell just the mounting kit on its own? Do you have a photo of the inside of the pannier with the pucks mounted (are they easy to remove without tools)? Thanks again.

My address is [email protected]
R 1100 GS and R 1150 GS case is tightening key to the rear wheel
R 1200 GS 17 mm flat key
This can be done on hand as it has Zega, no problem

 

[bystricke]

 

[bystricke]

My address is [email protected]
R 1100 GS and R 1150 GS case is tightening key to the rear wheel
R 1200 GS 17 mm flat key
This can be done on hand as it has Zega, no problem

 

[bystricke]

How can I get in touch regarding orders etc? Will you sign up here so I can PM you or do you have an email address? Can you sell just the mounting kit on its own? Do you have a photo of the inside of the pannier with the pucks mounted (are they easy to remove without tools)? Thanks again.

I can make it according to Figure

 

[twizzle]

Hi Bystricke,

Could you please quote me for the following:

40L Side Case X 1
45L Side Case X 1
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings
Delivery to UK
Aluminium Finish

If possible please could you quote in GBP?

do you except Paypal? if so Kourna, GBP or Euros...

Twizzle!

 

[bystricke]

Hi Bystricke,

Could you please quote me for the following:

40L Side Case X 1
45L Side Case X 1
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings
Delivery to UK
Aluminium Finish

If possible please could you quote in GBP?

do you except Paypal? if so Kourna, GBP or Euros...

Twizzle!

Hello Twizzle

manufacture only same frames, left and right side is the same (photo)

for such type of frame to be two cases (left and right side) the same can not mount a larger and smaller pannier

if you do not have frames, I can offer you the following:

1) 45L Side Case X 2
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings

2) 40L Side Case X 2
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings

is up to you how you decide

 

[twizzle]

HI Bystricke, Option 1 please:

) 45L Side Case X 2
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings

Hello Twizzle

manufacture only same frames, left and right side is the same (photo)

for such type of frame to be two cases (left and right side) the same can not mount a larger and smaller pannier

if you do not have frames, I can offer you the following:

1) 45L Side Case X 2
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings

2) 40L Side Case X 2
Locks
Mounting Frames for R1150GS Year 2001
All Pucks and Fixings

is up to you how you decide

 

[bystricke]

I manufacture several types of side suitcases but only one type of frames for 1100,1150,1200 GS and GSA

 

[twizzle]

that type of frame is fine for me.... so as per previous post if you could let me have a price in GBP or Kourna that would be great.

2x45l Case Aluminium
Frame for 1150
Puks and fixings...

Thanks

Twizzle

 

[bystricke]

HI Bystricke, Option 1 please:

45L Side Case X 2-------10000,-CZK=345 GBP
Locks--are included in price panniers
Mounting Frames for R1150GS Year 2001-----4000,-CZK=138 GBP
All Pucks and Fixings------1500,-CZK=52GBP
shipping ----84 GBP

total: 619,-GBP

My son has an account on paypal, it might pay to go through it

 

[Deleted account 220427002]

the lid on that doesn't look the tightest of fits... how do your lids seal, are the boxes guaranteed 100% waterproof?
can you show some pictures of the inside of the lids and seals

 

[bystricke]

pannier on the previous foto were not complete lid is fitted with rubber, waterproof case is 100%

 

[bystricke]

sealing rubber is glued on the lid, the lid before the completion
I've got bags before completion, they will finished, I will make detailed pictures

 

[Deleted account W]

These are the best looking hand made panniers I've seen on here. If I wasn't happy with my H&B's I'd be ordering a pair

Might start saving up for a top box

 

[bystricke]