Aluminum cases BEGR

[Deleted account 230818001]

Note,
We are currently away from the office but you can contact us with your enquiries at [email protected]

I've admired Zdenek's eye for design since I first saw his work
, so we are happy to be his distributor for the uk.

Regards, [email protected]

So did it all get off the ground OK ?

Are you now taking orders for the BEGR panniers and top boxes ?

 

[bystricke]

So did it all get off the ground OK ?

Are you now taking orders for the BEGR panniers and top boxes ?

yes
orders for subsequent sale will be on the following address:


Antrim House
Upper Street
Layham
Suffolk
IP7 5JZ
England

Tel: +44 (0) 1473 823351
Mob: +44 (0) 7767 051937

[email protected]

I here I will continue to monitor
I'll be glad for any comments, suggestions for improvement

 

[cbritton]

hI ALL,
Now back in the saddle (office) and ready to handle any enquiries for BEGR panniers , top boxes and systems.

They are not on the website yet as we are redeveloping it so bear with us.

Please email or pm me with enquiries.

Regards, [email protected]

 

[bystricke]

I give you self-supporting aluminum suitcase bike
You do not need a carrier
mounted directly to the wheel

order it will be able to: [email protected]

 

[Bendy toy]

My biggest issue with all of these cases (any brand) - no matter how well made they all waste a huge amount of space between bike and case. This makes the bike so wide traffic filtering has to be difficult and causes more windage & drag than really necessary.

Is this a reasonable idea?:
An exhaust lowering kit to the lower the silencer just below the side case. It could even be made to allow an easy change of exhaust angle for when cases are not fitted.
Then a pair of cases that that fit into and under the bike frame so the space between case and rear wheel is better used. These might have to be side opening, but as said its only an idea.

 

[Deleted account 230818001]

My biggest issue with all of these cases (any brand) - no matter how well made they all waste a huge amount of space between bike and case. This makes the bike so wide traffic filtering has to be difficult and causes more windage & drag than really necessary.

Is this a reasonable idea?:
An exhaust lowering kit to the lower the silencer just below the side case. It could even be made to allow an easy change of exhaust angle for when cases are not fitted.
Then a pair of cases that that fit into and under the bike frame so the space between case and rear wheel is better used. These might have to be side opening, but as said its only an idea.

Doesn't look like much of a problem to me

 

[cbritton]

Unlike the factory luggage the BEGR system is 90-92cms wide which is the same as the handlebar width on 1150s &. 1200s.

Cheers, [email protected]

 

[cbritton]

These arrived this week for a customer with a 1200GSA. Pretty striking in this colour combination with graphics by BEGR.

Cheers, [email protected]

 

[casperghst42]

My biggest issue with all of these cases (any brand) - no matter how well made they all waste a huge amount of space between bike and case. This makes the bike so wide traffic filtering has to be difficult and causes more windage & drag than really necessary.

Is this a reasonable idea?:
An exhaust lowering kit to the lower the silencer just below the side case. It could even be made to allow an easy change of exhaust angle for when cases are not fitted.
Then a pair of cases that that fit into and under the bike frame so the space between case and rear wheel is better used. These might have to be side opening, but as said its only an idea.

Have a look at RMS panniers (http://roger.mainufer.de/), very well made, and not cheap.

Casper

 

[Deleted account 230818001]

Have a look at RMS panniers (http://roger.mainufer.de/), very well made, and not cheap.

Casper

Just have a look at the pic in my previous post, can't see any problem filtering with those panniers on

 

[casperghst42]

Just have a look at the pic in my previous post, can't see any problem filtering with those panniers on

Didn't say it was impossible (I got TT's myself, and filtering quite often), but if anyone wants panniers which really sit tight, then Roger's are an option.

Casper

 

[Deleted account 230818001]

Fitted BEGR cases, road tested, spot on

 

[twizzle]

View attachment 222292

Fitted BEGR cases, road tested, spot on

Do they fit on standard GSA Pannier Frames? or do you need to replace with BEGR Frames??

Cheers

 

[Deleted account 230818001]

Do they fit on standard GSA Pannier Frames? or do you need to replace with BEGR Frames??

Cheers

I dunno

My GSA had the Vario luggage system fitted, so I ordered BEGR frames too.

 

[twizzle]

I dunno

My GSA had the Vario luggage system fitted, so I ordered BEGR frames too.

Cheers, I emailed Colin at Rider Mount.. He confirmed they will fit STD GSA rails...

 

[B Murr]

These panniers look very nice. I love the chamfered edges and corners, plus the welded seams. I still don't see anyone reporting on waterproof ness and how they cope with a fall.