Annoying Alarm

Bahram

Member
UKGSer Subscriber
Joined
Aug 23, 2020
Messages
50
Reaction score
3
Location
Manchester England
Hi All,
The alarm on my 1200 gs Lc is driving me up the wall, it goes off at the slightest touch when I’m working on the bike. It does not have a fob and re-arms itself a few seconds after I turn ignition off, I tried leaving ignition on but that drained the battery. Is there a way to stop it re-arming. TIA
 
Hi All,
The alarm on my 1200 gs Lc is driving me up the wall, it goes off at the slightest touch when I’m working on the bike. It does not have a fob and re-arms itself a few seconds after I turn ignition off, I tried leaving ignition on but that drained the battery. Is there a way to stop it re-arming. TIA

Keyed or keyless?

you should have a fob ..

Dare i suggest -

read the instruction manual
 
You dont say age of your bike but assuming its not a tft model go in to set up menu and turn DWA off.
 
BMW changed the DSA module because of problems, I think but not sure you can ask for change if problems.
 
If there is no FOB for the alarm, the choice is between automatic activation by turning ignition off or turning the alarm activation off. This is set through the menues on the LCD display, and the procedure is described in the riders manual.
 


Back
Top Bottom