Auxiliary Lamp Failure 2013 GSA

Pughy

Registered user
Joined
May 20, 2013
Messages
49
Reaction score
0
Location
Fowey, Cornwall
Hi. My OS Auxiliary driving lamp on my 2103 GSA has packed up. I have put a new bulb in and checked the out put from the connector at 13.2 V with the engine running. Any thoughts?

Thanks
 
U got HIDs if yes up the fuse I had this with mine
One on one off
 
Take top tank trim off
Fuse is under it
Look at the front headlight
It's on the left at the top of the fork
I think it only has two fuses in there
Any probs
Les Wassell is great
HID50.com
Hope this helps
 
Tank trim is on the left
As u look at it from front
There is one screw holding it on and one popper I think
 
Hi Gazza

That's brilliant thanks, I have checked the fuses and one is all misty and corroded so I will get to Halfords for a new one :) still cant fathom out how it still gets feed to the socket !!

I'll let you know

Many Thanks
 
Hi Gazza

That's brilliant thanks, I have checked the fuses and one is all misty and corroded so I will get to Halfords for a new one :) still cant fathom out how it still gets feed to the socket !!

I'll let you know

Many Thanks

You need Amps as well as Volts to light up a halogen bulb - corroded fuse contacts may still allow the latter while preventing the flow of the former in the necessary quantities.
 
Just seen this Pughy
glad all ok
i know nothing about these bikes - only this one bit of stupid info LOL
nice one
Gaz :beerjug:
 
You need Amps as well as Volts to light up a halogen bulb - corroded fuse contacts may still allow the latter while preventing the flow of the former in the necessary quantities.

Cheers Roy, that was clearly what was going on, new fuse, all sorted TA
 


Back
Top Bottom