Bar riser/ pivet ??

[Toy24]

HiFolks
Has anyone fitted these items on a LC . I am sort of happy with the standard set up , but i am toying with the idea of trying to improve my arm position just finding it a tad of an over reach but not really an issue.

 

[jackd]

A friend of mine fitted some recently and he is very happy with the results. He used to get a dull arm ache with the standard setup, but now cured.

 

[andylel]

I've got the ones that come up and back towards the riders. They have made a big difference in comfort for me.

 

[Voz]

I have a 13 GSW and have tried 3 different risers so far:

Rox 1 1/2" (37.5 mm) Fixed
Rox 2" (50 mm)Pivot
IliumWorks Bar Back Rise 1.3" (31.5 mm) / Back 1 1/2" (37.5 mm)

I am most satisfied with the IliumWorks Barback as it includes a brake banjo extension that stops the brake line pulling. Now that I have solved that problem I need to be careful not to strain the clutch cable and left switch bank wiring loom. I have already partially pulled out the connectors on the left switch bank causing intermittent switch operation.

I now have the bars tilted up more to resolve the cable issue and I am ok with the height and closer position of the bars. I am 6" with short legs long body and these fit me just right, good for standing up too. I also have the SW Motech pegs lowered 15 mm lower than stock.

 

[Jumblemo]

6"? Really? You would fit in a shoe box...

Or is that length rather than height?

 

[Voz]

I was referring to my cock but I suppose that was an overshare.

 

[batman1]

I've got the ones that come up and back towards the riders. They have made a big difference in comfort for me.

Which ones?
Did you need to alter any cables?
Thanks