bikeviz led lights

[hughguzzi]

Just fitted a pair of these to the 1150 gs, really easy !!. Mounted em under the front indicators with the wires going through a small hole, then along inside the stem and forward to connect to the side light bulb spades.
Very bright for the size and worth the money. Used the white led kit which does have the slight bluish led look. Question ..... want to uprate the sidelight bulb from 4w to brighter one as it now looks 'yellow' - what size bulb can the wiring safely take ?
Sorry cant figure out how to post a picture !!
anyone tell me ?

 

[Urban Rider]

Just fitted a pair of these to the 1150 gs, really easy !!. Mounted em under the front indicators with the wires going through a small hole, then along inside the stem and forward to connect to the side light bulb spades.
Very bright for the size and worth the money. Used the white led kit which does have the slight bluish led look. Question ..... want to uprate the sidelight bulb from 4w to brighter one as it now looks 'yellow' - what size bulb can the wiring safely take ?
Sorry cant figure out how to post a picture !!
anyone tell me ?

Hi Hughguzzi,

You need to get yourself one of these:

http://www.ultraleds.co.uk/advanced_search_result.php?keywords=BA9%2F233+1W+&categories_id=&inc_subcat=1&manufacturers_id=&pfrom=&pto=&dfrom=&dto=&x=68&y=6

It'll go very well with the LED's you have and give the side light a HID look to it

Very easy to fit as it's a direct replacemen. A word of advice though, put a thin film of glue/resin around the outside of the top of the bulb. Should you ever take it out they tend to break very easily. I have put Superglue around the outside of mine and it works a treat.....

 

[GunZenBomZ]

*Coughs* See this thread

http://www.ukgser.com/forums/showthread.php?t=214568

Bikevis also do replacement sidelights. Might try one of them Sado!

http://bikevis.co.uk/motorcycle-t10-501-led-sidelight.html

Hope it helps you]



http://imageshack.us/ is good for uploading images. Fairly self explanatory, pop your image from your phone etcetra on to the desktop, click upload > select image > keep it within 800-600 or slightly bigger & bish bash 'upload' bosh..post a link. You can post all the links to find which is best! Learn by trial & error my friend Use > forum code

 

[hughguzzi]

QUOTE :

Hi Hughguzzi,

You need to get yourself one of these:

http://www.ultraleds.co.uk/advanced_...&dto=&x=68&y=6

It'll go very well with the LED's you have and give the side light a HID look to it

Very easy to fit as it's a direct replacemen. A word of advice though, put a thin film of glue/resin around the outside of the top of the bulb. Should you ever take it out they tend to break very easily. I have put Superglue around the outside of mine and it works a treat.....
__________________
Emptiness is the starting point - In order to taste my cup of water you must first empty your cup. My friend , drop all your preconceived fixed ideas and be neutral. Do you know why this cup is so useful? Because it is EMPTY.....

R1150 GSA SE




Thanks SADO they look brill from 'ultraleds' just what I'm after !!
But.... the end looks larger than the standard bulb - will it push up through the rubber tube it sits in ? not sure where you mean to put some glue on the 'bulb' ...better check before I order one !!
thanks again ...