Brembo Brakes.

EricGS

Registered user
Joined
Oct 3, 2009
Messages
519
Reaction score
0
Location
Dublin, Ireland
Lads I have a BMW GS 1150 which has brembo brakes fitted.

I'm new to BMW ownership don't know much about them and haven't seen any of the other bikes I looked at with the Brembo brake caliper fitted. :nenau

Are they a standard part or would they have been fitted aftermarket. Just wondering when the time comes to replace the pads what pad would be needed.

Thanks in advance. :thumb2
 
Brembo standard on the 1100 and 1150 up till 2001/02.
 
It depends what you mean by Brembo Calipers.

If my memory is correct, 1150 GSes up to 2001 had BMW stamped on them although they were Brembo. From 2002 onwards the calipers changed for the evo brakes (and servo if you have abs in 2003) and had Brembo printed on the side.

Hope this helps

Mike
 
It depends what you mean by Brembo Calipers.

If my memory is correct, 1150 GSes up to 2001 had BMW stamped on them although they were Brembo. From 2002 onwards the calipers changed for the evo brakes (and servo if you have abs in 2003) and had Brembo printed on the side.

Hope this helps

Mike

Your info is all arse about face.
 
Brembo's overran the intro of the 1150's and then were replced by the "BMW" calipers. The calipers can be one of 3 I think (rusty memory) on the 1150's due to the intro of the "BMW" calipers and then Integral brakes. Same pads as 1100.

Ta
G
 
Your info is all arse about face.

:rob:rob:rob:rob:rob:rob:rob

True!

It should read:-

If my memory is correct, 1150 GSes up to 2001 had Brembo stamped on them. From 2002 onwards the calipers changed for the evo brakes (and servo if you have abs in 2003) and had BMW printed on the side although they were still Brembo.

Hope this is right this time!!!!

Mike
 
Eric, Mr Steptoe is being modest. look here:-

.

Thank you Mr Packer. I avoid pluggin my own products and work in posts. Far too tacky.
I let my products and work speak for themselves :D
 
Nope :augie

They aren't brembo, they're Tokico. :D

Live and learn! :rob:rob

I'd have put money on them being Brembo:blast but I bow to your professional knowledge.

Many thanks for putting me right.:thumb2

Mike
 


Back
Top Bottom