Came across this Top Case from Triumph dealer.

Looks like it has the same fitting to be compatible with a Givi base plate, if that’s the case it’s a cheap good quality box for any bike if you don’t mind the triumph logo not matching.

Might be worth putting a link in the bargains section 👍
 
Triumph metal boxes are made by Givi (as are the ‘factory’ boxes for: Moto Guzzi, Royal Enfield, and many others) and should fit straight on the Givi base plate. You can always put a sticker over the logo if it bothers you.
 
 
Last edited:
SuperTed said:
Triumph metal boxes are made by Givi (as are the ‘factory’ boxes for: Moto Guzzi, Royal Enfield, and many others) and should fit straight on the Givi base plate. You can always put a sticker over the logo if it bothers you.
Click to expand...
Hmm could it fit on to a 1300 GS?
 
The Triumph box is made by Givi but doesn't fit the Givi plates. The locking latch is about 10mm further forward on the Triumph boxes. It requires moving the locking base forward on the plate and drill two holes then Use the original bolts to reposition it. It takes no more than 10 minutes to do.
 
You will also need to buy a Givi lock and key set for the top box (£ 30 or £40 ), new Triumphs come with spare lock barrels and if you look on the website it states that there are no locks with the box.

Still a hell of a good saving though
 
Last edited:
sye said:
The Triumph box is made by Givi but doesn't fit the Givi plates. The locking latch is about 10mm further forward on the Triumph boxes. It requires moving the locking base forward on the plate and drill two holes then Use the original bolts to reposition it. It takes no more than 10 minutes to do.
Click to expand...
This (y)
 
Nippy Normans supply Touratech, Wunderlich, Desert Fox and many other makes of accessories.
You must log in or register to reply here.


Back
Top Bottom