can bus

bluey

Registered user
Joined
Feb 16, 2012
Messages
218
Reaction score
0
Location
london
hi all ive a 200gs 06 plate

i bought a garmin lead that fits the cam bus system the prob i have is

were the fook does it plug into lol
i cant find it anywere
 
Canbus connector

Have a look under and behind the oil cooler for a white plug with a black plug in the end tied up to some wires rinning behind the cooler,if not put your question in the search :thumb2
 
Mine was a bitch to find, you need good light!
There's a pic somewhere, see if i can find it
 
i believe it was moved on later bikes (08> probably) to somewhere near the oil cooler. not sure where exactly, as i wired mine to an aux socket on the beak.
 
seen pics thanks but someone said white plug in pics its black if that is the right one ive found it on bike yipy thanks peeps and peepets if theres any lol
 
i believe it was moved on later bikes (08> probably) to somewhere near the oil cooler. not sure where exactly, as i wired mine to an aux socket on the beak.

Possibly, mine is an 06 and was in the same place :beerjug:
 
I don't have a picture for where it is near/behind the headstock on earlier bikes.
on my 2008 it was immediately behind the lower edge of the oil cooler and it had a blanking cover in it (which has to be removed)

Photo is looking up underneath the beak from the right side of the bike.
CANBUS_Connector1.jpg
 
seen pics thanks but someone said white plug in pics its black if that is the right one ive found it on bike yipy thanks peeps and peepets if theres any lol

On my 05 models, it's a black plug, but with a WHITE blank off cap in it. It's near the headstock.

BMW sell a plug that plugs into there, and is ideal for wiring your Garmin up.
 


Back
Top Bottom