Care to name a price?

[Mav]

For this little beauty

 

[Mav]

Couple more pics

 

[peepingtom]

£7k ?

needs those tank badges though......very nice

 

[Shurv]

What's the spec then?

 

[Mav]

What's the spec then?

Ohlins, strengthened HPN chassis, WP forks, twin discs up front, rear disc brake as part of 1150 swing arm, 1043cc engine - 71hp, 400w alternator...

 

[MikeO]

How have they solved the rear wheel offset snag that seems to be the main problem with fitting an 1150 swingarm?

Mike

Seems to have had an explosive loss of fork oil, too...

 

[Mav]

So here's the price
















34,990 Euros!

http://suchen.mobile.de/motorrad-inserat/bmw-hpn-sport-r-100-gs-speyer/176868289.html

 

[rocky burns]

How much

 

[Wreford Miles]

Makes one of these look a bargin http://www.ukgser.com/forums/showthread.php?t=211349&highlight=Richie+Moore

 

[Rob Farmer]

There was a well used Moorespeed for sale a while back for £7k

http://www.horizonsunlimited.com/hu...ale-wanted/moorespeed-bmw-r100gs-1984-a-63408

Not pretty but at least the expensive engineering works been done.

 

[Wreford Miles]

There was a well used Moorespeed for sale a while back for £7k

http://www.horizonsunlimited.com/hu...ale-wanted/moorespeed-bmw-r100gs-1984-a-63408

Not pretty but at least the expensive engineering works been done.

Mav this is the one I mentioned to you, it had the pucker frame and forks and the engine alone had cost £6500!

 

[Mav]

Mav this is the one I mentioned to you, it had the pucker frame and forks and the engine alone had cost £6500!

That looks like just the ticket - I take it it's already sold?

 

[Steptoe]

How have they solved the rear wheel offset snag that seems to be the main problem with fitting an 1150 swingarm?

Mike

Have the wheel built with an offset rim

Here's one i done earlier

And the drive shaft..

 

[MikeO]

Have the wheel built with an offset rim

Here's one i done earlier

And the drive shaft..

There's enough clearance for the standard caliper? I'm guessing it must be fairly tight...

Mike

 

[CrazyIvan]

Have the wheel built with an offset rim

Here's one i done earlier

And the drive shaft..

I don't mind you posting pictures of bikes I've build, but please don't imply that I botched up that drive shaft.

I used a gearbox adaptor and a 1100 drive shaft.

 

[Kenny]

Our Steptoe never lies !!