Changing rider footrests spring problem

resovoir

Member
UKGSer Subscriber
Joined
Oct 30, 2020
Messages
90
Reaction score
19
Location
South Coast England
Hi Changed my footrests on GS 1250 to Wunderlich lower ones with no problem, and when selling bike replaced the originals back again no problem. Started to try and change the footrests on the 1300GS to Wunderlich lower pegs but having a real problem releasing the springs so that I can remove the spindle. Any tips to succeed please.
 
Hi Changed my footrests on GS 1250 to Wunderlich lower ones with no problem, and when selling bike replaced the originals back again no problem. Started to try and change the footrests on the 1300GS to Wunderlich lower pegs but having a real problem releasing the springs so that I can remove the spindle. Any tips to succeed please.
Compress them with cable ties maybe?
 
Do you mean the original spring on the original pegs? If so, get something flat (or use your thumb) and press the middle bit of the spring on the top and push it down slightly while gently poking something into the side to push the spindle through (once you've removed the C clip obviously)
 
I assume you’re trying to remove the OEM rider footrests. Why do you need to do anything to the spring to remove the spindle? It just pulls out. They’re identical to 1250 footrests. Do you have something different on there like Option 719 or something?

It’s refitting the original footrests that’s a pain as you do have to compress the springs to get the footrest and mount holes to line up.
 


Back
Top Bottom