Chigee AIO6 falling out of cradle

[Andy B]

I have BMW OEM Sat Nav locking cradle on my bike.



I recently had an instance where the Chigee fell out of the locked cradle when I hit a particularly large pothole. Quite remarkably, I caught it as it bounced off the tank so damage minimal.

Has this happened to anyone else?

My mate has a Carpuride 702BS and comparing the indents on the Carpuride where it secures into the cradle it looks better designed with 'sharper' edges to the indents than on the Chigee.

 

[Buttertub]

I have BMW OEM Sat Nav locking cradle on my bike.

View attachment 526573

I recently had an instance where the Chigee fell out of the locked cradle when I hit a particularly large pothole. Quite remarkably, I caught it as it bounced off the tank so damage minimal.

Has this happened to anyone else?

My mate has a Carpuride 702BS and comparing the indents on the Carpuride where it secures into the cradle it looks better designed with 'sharper' edges to the indents than on the Chigee.

When you slide the locking bar across can you see any red showing in the small gap at the top of the device ? If so it might not be engaging properly. Mines not a chigee but a connected ride nav and it used to show a smidge of red at the top when locking it in, never dropped out though, but it did cross my mind of the thing bouncing down the road.
After a few tests i find when engaging the slide bar if i firmly snap it across (not too hard though) it fully engages and the red warning goes away i.e its fully engaged.
Worth a look to see if its an issue on your device.

 

[IrishGaucho]

Have not had that experience at all, nor I see any movement with it on the base.

Maybe a little piece of tape can make things a little tighter for your?

Otherwise, reach out to chigee, maybe they can replace the base if it is worn or defective.

 

[Barnoe]

I was adjusting the cradle for my Carpuride 702BS Pro to fit in better, it was slightly to the right and full lock bars hit it.

I stupidly put the unit on the tank as i did and it fell off.
i went to grab it and invertedly batted it, bouncing down the steps and down the flagged area about 30 feet away

my heart sank, it now has a slight scratch on a corner it but still works fine... crikey what an idiot!
honestly thought it would be knackered though.... tough shite this Chinese stuff

 

[Andy B]

When you slide the locking bar across can you see any red showing in the small gap at the top of the device ? If so it might not be engaging properly. Mines not a chigee but a connected ride nav and it used to show a smidge of red at the top when locking it in, never dropped out though, but it did cross my mind of the thing bouncing down the road.
After a few tests i find when engaging the slide bar if i firmly snap it across (not too hard though) it fully engages and the red warning goes away i.e its fully engaged.
Worth a look to see if its an issue on your device.

I'm pretty sure I'm not seeing any red but I will double-check. What concerned me was that when I locked it in again if I used a lot of force I could make it come out of the cradle again. When I tried the same with my mate's Carpuride it was absolutely rock solid and there was no way it was coming out.

I have reached out to Chigee but at the moment the reaction I am getting is 'we've not heard of that before'. It could be a one-off, but I do not feel happy using it for as long as I can force it out of the cradle.