CoLight Aux Lights - Fitting & Thoughts
- Thread starter matsmith749
- Start date
For anyone still following this thread and particularly anyone concerned about my wiring capabilities (no?... just me then). Have the new D09 Pro five wire lights working. Went back and checked every connector and think I'd missed a dodgy connection.
So in summary, Stammering Biker's four way diagram works with the five wire new ones. The blue/green new wire is, according to Colight a horn/passing light trigger and, as I've done, can be tucked away.
They are easy to control/assign with the EzCan and look great. I used an Ali Express bracket to hang them from.
This is from Colight who've offered pretty good customer service throughout, though unsurprisingly they don't recommend taking a pair of scissors to their product.
"For your new 5-wire D09 Pro, the five wires from the light are:
So in summary, Stammering Biker's four way diagram works with the five wire new ones. The blue/green new wire is, according to Colight a horn/passing light trigger and, as I've done, can be tucked away.
They are easy to control/assign with the EzCan and look great. I used an Ali Express bracket to hang them from.
This is from Colight who've offered pretty good customer service throughout, though unsurprisingly they don't recommend taking a pair of scissors to their product.
"For your new 5-wire D09 Pro, the five wires from the light are:
- Black – Ground / Negative
- Red – High Beam
- Thick White – Low Beam
- Thin White – White DRL
- Yellow – Amber DRL
