Diode board wiring

[byron]

I was just wondering anybody could help me with the wiring for the three wires to fit in to the tags on the diode board. Sadly my photographs don't match with my labelling somehow the photographic colours have changed. As per the Haynes manual I have put:

So I have connected Red to 3, Green to 4 and Brown/Black to 5.
The bike is a 76 R90s

 

[ChasF]

Any order works.

 

[Rob Farmer]

yep! They usually have all three wires the same colour.

And don't forget the earth wire between the engine case and the diode board. - just don't attach them to the wrong diode board mounts or you'll let the smoke out..

 

[Redboots]

And don't forget the earth wire between the engine case and the diode board.

Metal mounts like the older bikes... They don't fail either.

 

[byron]

yep! They usually have all three wires the same colour.

And don't forget the earth wire between the engine case and the diode board. - just don't attach them to the wrong diode board mounts or you'll let the smoke out..

Thanks for that gentleman and I have the 2 earth wires cleaned and attached.