£300 ish IIRC...Denzo is now in Newhaven I believe
Mothership wanted £1300 and that was with a 80% contribution from themselves to replace my rear when it failed
Denzo will be far cheaper
£300 ish IIRC...Denzo is now in Newhaven I believe
Mothership wanted £1300 and that was with a 80% contribution from themselves to replace my rear when it failed
Denzo will be far cheaper
Well that doesn't sounds like a cheap fixHad a similar problem on a R1250RS, suspension felt solid and nothing changed on playing with esa settings, dealer diagnosis didn't reveal anything suspect.
However during annual service it was noticed the shaft recall hadn't been done, some water ran out when fitting the drain, turned out the shaft had seized at both ends, took them a few hours to free and cut out the shaft and replace it.
The ride home afterwards was like a completely different bike and changing suspension settings actually made a difference, bike was also a lot quieter.
I went out for a ride this weekend after the re calibration.
Still not right, BUT when i changed modes it did feel different.
The suspension although still banging and hard is less in Rain mode than it is in Dynamic for instance.
As @anotherone mentioned i am leaning more towards a shaft issue.
I have booked in with Williams BMW Manchester for them to look at it, i might as well ask for a full service including the final drive too.
I will explain the issues to the mechanic and await his opinion.
Yes it was done a few years back.have you had the recall done for the shaft to be inspected/replaced yet? (if your Bike is in that catchment).

I've sent him a message from his website form.Get it fixed by Denzo or look at aftermarket shocks
Thats a ludicrous price for a new unit, hope you can get it refurbished at a much more sensible priceSo went and picked the bike up
Quote to fit new strut £2004.31
I dont think the bikes worth spending that much on tbh
Sad part of this is i was thinking of finally part exing my bike for either a late 1250 or a new 1300.I had the same with both front and rear esa on a 1200r. I sent them to Denso, both had seized solid with internal corrosion and the bike was mint! He rebuilt them both making them serviceable in the future too for £500 ish . Really swift and easy procedure using the post would highly recommend. Ask him how many he does!!!! BMW know this is an issue!
Sent from my iPhone using Tapatalk
Yea i looked at this on ebayHave you looked for 2nd hand units? Maybe they'll be cheap enough to maintain a good trade in price.