Hi all, looking for the pictures to go with this text below. I have the reprom but can't work out how to search it for anything and looking through it I cant find the exhaust flap either! I see someone posted how to connect the cables and reset the exhaust valve (the text below) but pictures are worth a thousand words...so can anyone link the piccies or tell me where on the reprom to look for this?
" Switch on the ignition. Actuator motor moves to the "flow control valve open" position.
Switch off the ignition.
Ease back grommets (1) and (4).
Slacken locknuts (2) and (5).
Turn adjusting screw (3) until all play at the Bowden cable has been taken up, then back off the adjusting screw 2 to 3 turns to relieve the Bowden cable.
Secure adjusting screw (3) with locknut (2).
Turn adjusting screw (6) until all play at the Bowden cable has been taken up, then back off the adjusting screw 2 to 3 turns to relieve the Bowden cable.
Secure adjusting screw (6) with locknut (5).
Adjusting screw (3) looks to be the one closest to the engine."
PS, not really into a debate on how to remove the cables/disconnect/do away with etc..just want to know how to set them again...
" Switch on the ignition. Actuator motor moves to the "flow control valve open" position.
Switch off the ignition.
Ease back grommets (1) and (4).
Slacken locknuts (2) and (5).
Turn adjusting screw (3) until all play at the Bowden cable has been taken up, then back off the adjusting screw 2 to 3 turns to relieve the Bowden cable.
Secure adjusting screw (3) with locknut (2).
Turn adjusting screw (6) until all play at the Bowden cable has been taken up, then back off the adjusting screw 2 to 3 turns to relieve the Bowden cable.
Secure adjusting screw (6) with locknut (5).
Adjusting screw (3) looks to be the one closest to the engine."
PS, not really into a debate on how to remove the cables/disconnect/do away with etc..just want to know how to set them again...
