milleplod Well-known member UKGSer Subscriber Joined Feb 12, 2016 Messages 1,038 Reaction score 16 Location Bolsover, no longer the home of the Beast. Aug 29, 2020 #1 .....does it just pull out? I'm about to change the oil on my RT, so want to use the breather hole for refilling. Pete
.....does it just pull out? I'm about to change the oil on my RT, so want to use the breather hole for refilling. Pete
AustinW Well-known member UKGSer Subscriber Joined Jan 22, 2014 Messages 2,333 Reaction score 720 Location Garstang Lancashire Aug 29, 2020 #2 Yes it just pulls out - well it dies on my 2011 GSA. Crap design.
Mistacat Well-known member UKGSer Subscriber Joined Nov 2, 2011 Messages 1,844 Reaction score 352 Location Grantham, England Aug 29, 2020 #3 Best to fill the final drive through the speedo/ abs sensor hole. It also gives you chance to clean any muck from the sensor.
Best to fill the final drive through the speedo/ abs sensor hole. It also gives you chance to clean any muck from the sensor.
milleplod Well-known member UKGSer Subscriber Joined Feb 12, 2016 Messages 1,038 Reaction score 16 Location Bolsover, no longer the home of the Beast. Aug 29, 2020 #4 Ta chaps. Job done - I popped the breather off, but then decided to take the wheel and silencer off too, and give it a good fettle under there. I used the filler plug to refill, and took the sensor out and cleaned it while I was at it. Jobs a good 'un. Pete
Ta chaps. Job done - I popped the breather off, but then decided to take the wheel and silencer off too, and give it a good fettle under there. I used the filler plug to refill, and took the sensor out and cleaned it while I was at it. Jobs a good 'un. Pete