Finished my x

[finn]

New mt21 with mouses tail tidy ok but no number plate lite as yet nice Remus no indicators but hey I'd only break them, big tt baseplate not sure how good it is as seems to hit one of the nuts underneath not the sump the other one so will have to see what happens first big bash!!

 

[Robbo1200ADV]

Wish I'd Bought that a Minter!!

 

[FERRET]

Finn
just a word of caution, it looks as if you are using the origional gear lever! there have been instances where the gear lever has hit large rocks and snapped the shaft at the point wher it enters the casings, full engine apart to fix, Kawasaki kx80 steel levers fit as do steel F650GS items or as i seen done, drill a hole on the bend and a slight hacksaw cut in the same place will hopefully make this a weak point wich will then break the lever instead of the shaft.
Nice looking bike, bet it wont stay that clean for long though.

 

[finn]

Finn
just a word of caution, it looks as if you are using the origional gear lever! there have been instances where the gear lever has hit large rocks and snapped the shaft at the point wher it enters the casings, full engine apart to fix, Kawasaki kx80 steel levers fit as do steel F650GS items or as i seen done, drill a hole on the bend and a slight hacksaw cut in the same place will hopefully make this a weak point wich will then break the lever instead of the shaft.
Nice looking bike, bet it wont stay that clean for long though.

Cheers got a steel one as soon as as I've got an off road ride planned!! Oh trf meet tonight!!
Hograost hmmmmm

 

[Robster]

Looks good

What make is the screen and where from?

 

[finn]

Looks good

What make is the screen and where from?

came with the bike have a look here but think it was from a guy on adv?
http://www.ukgser.com/forums/showthread.php?t=302526

 

[JohnnyBoxer]

Don't forget the TT ChainGuide and Rear Disc protector - essential for UK, if you look at the grooves in mine

 

[finn]

Don't forget the TT ChainGuide and Rear Disc protector - essential for UK, if you look at the grooves in mine

Rushys got some bits hoping to get there tomorrow for final fitting!!

 

[Losttheplot]

Fin,

don't forget to close off the vents in the back of the front mudguard!

I didn't, and ended up filling the core of the radiator with mud, which didn't aid cooling much

 

[rossi]

Rather than buy the TT chain guide you can buy the guide block which is a £10 ktm part and make your own mounting bracket.

 

[Losttheplot]

Shouldn't this thread title be edited to "almost finished" ??

 

[Fluffmeister]

Looks great, if you want a number plate light, I have a small LED jobbie sitting in my tool box at home your welcome to if your passing Warrington sometime.

 

[Micky]

Looks great Finn

 

[finn]

Ok taped the vents up cheers

More frame protection looks a bit weird and possible its upside down but dosent fit any other way

New lever for yz 250

Case saver from rushy cheers

Bar the chain bits and frame washers i need to get and rear light for number plate getting there

 

[finn]

Flexi plate and tail light!!

 

[Rushy]

Nice one Chris ....looks right to me

Makes me miss mine ....

 

[finn]

So as i missed the hograost ride decided to try a trf day for the x couple of moments where it was too tall and lost my footing and 2 end of lane offs as they were in the way!!
half way

And eddie will be along any minute with the offs!!

 

[finn]

And just to prove x challenges go through water ok
http://vimeo.com/m/45506472

 

[dean0n0]

and the horn works!

 

[finn]

horn is good just remember when trail riding not to stop at the end of the trail where some muppet like me comes flying along at 20 mph well 10 maybe and has no where to go but down
http://www.youtube.com/watch?v=3DuMu6JfY7Y&feature=youtu.be
Eddies vid from Sunday if your bothered