has anybody had to fit a new battery positive wire. The tag on the end broke off. The fit is very tight so no chance of pulling it through at all. Am I right in assuming the tank has to come off? All help appreciated
Fit new positive battery lead
- Thread starter resovoir
- Start date
Could you get away with just undoing the rear bolts and lifting it to give you the room??
If you look at battery connector the wire is soldered and crimped , but the connector has is longer and it grips the actual cable outer for additional security. I have spent hours on web but cannot find such a connector. The wire will fit it to a 25mm sq area connector just very tight fit or it means using 35mm sq area connector In conclusion I would like a connecter with the extra length that grips onto the cable outer . Any help appreciated
Victor c
Registered user
I would give these guys a call https://www.motorworks.co.uk/
They may well have a replacement cable available, as well as information on where it runs to replace it.
They may well have a replacement cable available, as well as information on where it runs to replace it.
In addition to what Victor c has mentioned I would use realOEM to find the part number
Then contact Motorworks (who uses realOEM) to make sure you get the right part
Then contact Motorworks (who uses realOEM) to make sure you get the right part
RealOEM.com - Select Your BMW Model
RealOEM.com BMW Parts website. This site can be used to look up BMW part numbers and approximate part prices. The Parts are grouped into diagrams and diagrams are grouped into categories and subcategories
realoem.com
